AD-425S Automatic Door Operator
Instruction Manual
General Safety Precautions
zThis instruction manual is intended solely for use by qualified professionals. All installations, electrical connections and adjustments must follow the installation instructions.
zPlease read this manufacturer's instructions carefully before installing this unit. Incorrect installation may result in severe personal injury and/or damage to property.
zPackaging materials (plastic and polystyrene, etc) should be disposed of without causing environmental damage and should be kept out of reach of children.
zDo not install this unit in a chemical explosive environment or atmosphere to prevent a risk of explosion. The location of this unit is important in achieving proper performance and normal operating life. This unit should be installed in a safe operating condition
zMake sure the construction‘s strength and stability are up to standard.
Manufacturer will not be held responsible for any damage resulting from incorrect use of this unit.
zThese safety devices (e.g. photocell and emergency stop) must follow the technical safety regulations and current safety standards, including limiting of forces and speeds to ensure the door operator works very well at all times.
Encoder
Photocell
zThe safety devices must protect any areas where the risk exits of being crushed, cut or gagged or where there are any other risks generated by the motorized door or gate. Apply hazard areas notices required by applicable regulations.
zEach installation must clearly show the identification details of the motorized door/gate.
Copyright All Rights Reserved. |
|
Page: 1/ 20 |