Gianni Industries AD-425S instruction manual Need a Stopper Ball

Page 16

Steps

Figures

Explanation

Step 24.

Fix

the Sliding Rail on the door leaf. (Screw

specification: 6 X 20 mm)

 

Step 25.

Slide in the Sliding Rail Cover.

Step 26.

Attach two Side Ends.

Step 27.

Depending on the door leaf opening angle, there may

need a Stopper Ball.

 

Optional electric lock, wireless push button, microwave

Step 28.sensor, reader and other accessories can be used with the AD-425S operator. See the Control Board guide above on Page 3-5 to wire this application.

Step 29.

After the initial installation, please connect AC power

and turn the switch on.

 

Copyright All Rights Reserved.

 

P-MU-AD425S Ver. A Publish:2008.07.11

Page: 16/ 20

Page 15 Page 17
Image 16
Page 15 Page 17
Contents General Safety Precautions AD-425S Automatic Door OperatorSecurity Statement Manufacturers DeclarationConstruction Name All Packing materialsControl Board Control Board Guide MotorBattery Opening, closing and maintain -open time illustration table Specification Current See FigureInstallation instructions Prepare the installationPage Page AD-425S Template Installation Instruction Installation Steps Out-swing door Right-Hand Open Steps Steps Steps Need a Stopper Ball Steps Trouble shooting LockMaintenance every 6 months Normal OperationDistributor
Related manuals
Manual 5 pages 5.61 Kb
Top Page Image Contents