Steps | Figures | Explanation |
|
| Use Allen Wrench to tighten the Blind Nut. This will |
Step 12. |
| compress the screw so that it remains permanently |
| fixed in the hole. Repeat these steps on other Blind | |
|
| |
|
| Nuts. (Do not over tighten the Blind Nut.) |
Step 13. | Blind Nuts installation completed. |
Step 14. | Insert two mounting screws. (Screw specification: 6 X | |
20 mm) | ||
|
Step 15. | This is the position of Mounting Hanger. |
Step 16. | Mount the automatic door operator. |
Step 17. | Tighten the other 4 screws. (Screw specification: 6 X | |
20 mm) | ||
|
Copyright All Rights Reserved. |
|
Page: 14/ 20 |