Gianni Industries AD-425S instruction manual Control Board Guide, Motor

3.Control Board Guide

Input/Output Contact	Explanation	Remark
	Make sure the input is used correctly (AC110 or 220V).
	When turn on the power switch, it enters a learning
	mode.
		Power Switch
	AD-425S Operating Arm turns clockwise. (See Figure
	5~8)
	AD-425S Operating Arm turns counter-clockwise. (See
	Figure 5~8)
	DIP3 switch ON, when the external pressure force either
	“WIND” or “MAN MADE FORCE” occurs, AD-425S will
	automatically open and close.
	DIP3 switch “2”, when the external pressure force either
	“WIND” or “MAN MADE FORCE” occurs, AD-425S can
	be manually opened and closed.
		When	Lock	is
		opened and wait
	REDA1 internal connector links up the control unit.	up		to
		0.7seconds,		the
		Motor	will	be
		activated.
		When	Lock	is
		opened and wait
	REDA2 external connector links up the control unit.	up		to
		0.7seconds,		the
		Motor	will	be
		activated.

Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11	Page: 4/ 20