Steps
Step 7.
Step 8.
Step 9.
Step 10.
Step 11.
Figures | Explanation |
Use Allen Wrench to tighten the Blind Nut. This will compress the screw so that it remains permanently fixed in the hole. Repeat these steps on other Blind Nuts. (Do not over tighten the Blind Nut.)
Blind Nuts Installation illustration
Blind Nuts installation completed.
Place the sliding rail template to the right position on the door. See the figure presented for an out-swing door (Right-Hand Open), more details shown in Figure 17.
Mark for pilot holes. (Use the center pointer)
Drill three Ø 9.5mm pilot holes.
Copyright All Rights Reserved. |
|
Page: 13/ 20 |