Hearth and Home Technologies SC60 owner manual Listing Label Information/Location, Grate, Number

Page 2

Read this manual before installing or operating this fireplace.

Please retain this owner’s manual for future reference.

Congratulations!

Congratulations on selecting a Heatilator wood burning fireplace. The Heatilator fireplace you have selected is designed to provide the utmost in safety and reliability.

As the owner of a new fireplace, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future refer- ence. We suggest you keep it with your other important documents and product manuals.

Your new Heatilator wood burning fireplace will give you years of durable use and trouble-free enjoyment. Wel- come to the Heatilator family of fireplace products!

 

Homeowner Reference Information

We recommend that you record the following pertinent

 

 

 

 

 

 

 

information about your fireplace:

 

 

Model Name:

 

 

Date purchased/installed:

 

 

 

Serial Number:

 

 

Location on fireplace:

 

 

 

Dealership purchased from:

 

 

Dealer phone:

 

 

 

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listing Label Information/Location

The model information regarding your specific fireplace can be found on the rating plate located on the smoke shield of the fireplace.

Serial

Grate

Fireplace

Number

Model

 

FIREPLACE NO.

FIRE DAMAGE. REPLACE MODEL NO.

 

WARNING: RISK OF

 

GRATE WITH HEARTH & HOME

 

TECHNOLOGIES INC.

MODEL NO.

MFG. DATE

FIRECHAMBER INTENDED FOR USE WITH HEARTH & HOME TECHNOLOGIES INC. LISTED FIREPLACE PARTS. SEE INSTALLATION AND OPERATING INSTRUCTIONS FOR THIS MODEL. ONLY HEARTH & HOME TECHNOLOGIES INC. GLASS DOOR KITS CAN BE INSTALLED ON THIS UNIT.

FIREPLACE ALSO FOR USE

YES

IN MANUFACTURED HOMES

 

NO

CLEARANCE TO

CHIMNEY

FIREBOX

COMBUSTIBLES:

2 IN. MIN.

 

IN.

MIN.

FAN KIT

 

 

&

 

 

 

 

RATED AT

 

 

 

MODEL NO.

 

 

 

 

 

 

115 VOLTS, 50/60 Hz.,

 

AMP.

 

 

 

 

 

 

 

 

 

 

 

 

 

DO NOT OVERFIRE. USE ONLY: SOLID WOOD FUEL OR

 

WARNING! THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED

 

 

 

LISTED DECORATIVE GAS APPLIANCE. DO NOT USE A

 

GAS LOG SET. TO REDUCE THE RISK OF FIRE OR INJURY, DO NOT

 

FIREPLACE INSERT OR OTHER PRODUCTS NOT

 

 

 

INSTALL AN UNVENTED GAS LOG SET INTO FIREPLACE.

 

SPECIFIED FOR USE WITH THIS PRODUCT. IF DOORS

 

WARNING! THIS APPLIANCE IS NOT FOR USE AS COOKING EQUIPMENT.

 

ARE USED OPERATE FIREPLACE WITH DOORS FULLY

 

 

OPEN OR CLOSED ONLY. WHEN BURNING A

 

 

 

 

 

 

 

 

 

 

 

 

IF INSTALLATION OR OPERATING INSTRUCTIONS ARE MISSING

 

DECORATIVE GAS APPLIANCE IN THE FIREPLACE,

 

 

 

CONTACT: HEARTH & HOME TECHNOLOGIES INC.,

 

 

ADJUST DAMPER TO THE FULLY OPEN POSITION.

 

 

 

 

 

 

 

 

1915 W. SAUNDERS ST., MT. PLEASANT, IA 52641.

 

 

 

 

 

 

 

 

 

 

Note: An arrow (Î) found in the text signifies change in content.

2

Heatilator • SC60 • 32838 Rev X • 10/08

Image 2
Contents Fire Risk Wood Burning FireplaceHot screen/mesh and glass doors will cause burns Number Listing Label Information/LocationGrate Safety Alert Key Table of ContentsInstaller Guide User GuideHearth & Home Technologies Limited Warranty CONDITIONS, Exclusions & Limitation of LiabilityHeatilator SC60 32838 Rev X 10/08 Non-Combustible Materials Listing and Code ApprovalsAppliance Certification Combustible MaterialsHot glass will cause burns Operating InstructionsYour Fireplace Grate Seasoned WoodStarting a Fire FirescreenOptional Components Glass DoorsVented Gas Log Sets & Gas Log Lighters Clear SpaceWood Fuel Disposal of Ashes Maintainance and ServiceChimney Inspection/Cleaning Creosote Formation and Need for RemovalInspect Grate Glass CleaningCheck Firebrick Frequency As desiredTroubleshooting Guide Start Fire Problems Possible Cause SolutionGetting Started Typical Fireplace SystemNegative Pressure Design and Installation ConsiderationsDraft Locating Fireplace & Chimney Frequently open doors Central heat outlets or returnsInspect Fireplace and Components Tools and Supplies NeededFireplace System Requirements Framing & Clearances Select Fireplace LocationClearances Clearances to Combustible MaterialsSidewalls/Surrounds Frame the FireplacePosition the Fireplace Installation of FireplaceThings to Consider Place Protective Metal Hearth StripsFt min. from top of uppermost chimney section to air inlet Install Outside Air Kit To service or replace the fan kitChimney Assembly Chimney Requirements Height of Chimney ComponentsUsing Offsets/Returns ExampleAssemble Chimney Sections Install Chimney Air KitInstall Ceiling Firestops Install Attic Insulation Shield Prepare Attic Insulation ShieldFollowing steps should be skipped if using a chase Complete InstallationInstall Flashing Cut out Hole in RoofChimney Termination Requirements Flat RoofsChase Installations Construct the ChaseInstall Fireplace & Chimney Install Chase TopInstall Termination Cap ST375 Square Termination CapTS345/TS345P Square Termination Cap Field Constructed Shrouds ShroudsRadiation Shield Open Top Shroud TR342 caps require radiation shieldMailbox Style Shroud radiation shield required Roofed Style Shroud radiation shield required= 1/k x inches of thickness FinishingHearth Extension Finishing Material HX3 or HX4 Hearth Ext or equivilent insulationCombustible Mantel Firebrick Installation 13 Side Brick InstallationWood Burning Inserts AccessoriesGas Log/Lighter Provision Gas Code, Ansi Z223.1Materials Fireplace1321 mm 406 mm Chimney Components Catalog #14-1/2 10-7/8 276 mm Service PartsContact Information
Related manuals
Manual 48 pages 44.95 Kb