LG Electronics LA120CPO Preparing Work for Installation, Open panel front, Drain hose junction

Installation

PreparingWork forInstallation

Open panel front

1.Pull the upper part of the front panel.

2.Lift up the panel.

3.To detach the front panel, remove the two screws at the lower part.

4.Detach the front panel from the body.

5.To detach the panel, disconnect the connector at the upper part.

Panel Front

Connector

Cover pipe and cover side remove

1.Please remove the screw of the center tuning cover.

2.Pull up the side cover of desired connecting direction, then cover side is separated.

3.Pick the pipe hole of the side cover.

CAUTION: After removing the pipe hole, cut the burr for safety.

NOTICE When making pipe path through rear wall, you don’t need to pick the pipe hole.

Pipe hole

Side cover

Drain hose junction
1. Remove the rubber stopple in the desired drain direc-
tion.
2. Insert drain hose into the handle of drain pan, and
join drain hose and connecting hose according to the
figure by.	Adhesive	Onlythe
		desired
		desireddirection
	Connecting
	part
	Drain	rubber cap
	hose
		Service Manual	17