State Industries SSED 5 Control System Operation, Heating Element Operation, Desktop Screen

Page 17

CONTROL SYSTEM OPERATION

HEATING ELEMENT OPERATION

FIGURE 3.

Depending on tank size and how they were ordered from the factory the water heaters covered in this manual may be equipped with 1 to 5 electric heating elements. The illustration here shows how the heating elements are numbered for control purposes and how the openings for each heating element are physically located on the water heater’s storage tank.

Control Options

The water heaters covered in this manual are factory ordered with 1 of 3 different heating element control options as follows:

On/Off Control: This is the only configuration available on models equipped with a single heating element and the standard configuration on models equipped with more than one element. All elements are cycled on simultaneously with each call for heat, however there is a one second delay between elements being energized to reduce starting current. All elements are cycled off at the same time at the end of each heating cycle.

Progressive Sequencing: Only available on models equipped with multiple heating elements. Elements are energized and de-energized according to adjustable (1 to 20°F) Differential set points for each element. Element Rotation - first element on is rotated with each successive call for heat. First On/First Off - the first heating element energized at the beginning of a heating cycle is the first element de-energized at the end of the heating cycle. Successive heating cycles would progress as follows on a model equipped with 3 heating elements:

•First heating cycle: Elements come on [1, 2, 3] and cycle off [1, 2, 3].

•Second heating cycle: Elements come on [2, 3, 1] and cycle off [2, 3, 1].

•Third heating cycle: Elements come on: [3, 1, 2] and cycle off [3, 1, 2].

•Fourth heating cycle: pattern repeats - same as first.

CONTROL SYSTEM FEATURES

Advanced Diagnostics

Plain English text and animated icons display detailed operational and diagnostic information. LCD screen on the front of the water heater displays theSequenceofOperationinrealtime.FaultorAlertmessagesaredisplayed

when operational problems occur. Advanced Service menu displays a list of possible causes for current Fault and Alert conditions to aid in servicing.

Economy Mode Operation

Control system automatically lowers the Operating Set Point by a programmed value during user defined time periods. Helps reduce operating costs during unoccupied or peak demand periods.

CONTROL SYSTEM NAVIGATION

The UIM (User Interface Module) is located on the front cabinet of the water heater. All operational information and user settings are displayed and accessed using the UIM. The UIM includes five snap acting (momentary) user input buttons; an Up, Down and 3 Operational Buttons.

FIGURE 4.

Up & Down Buttons

Used to navigate (up and down) and to select (highlight) menu items. Also used to adjust or change (increase/decrease, on/off, set time) various user settings.

Operational Buttons

The 3 Operational Buttons are multifunctional. Their current function is defined by the text that appears directly above each button on the LCD screen. The function will change depending on what menu is currently displayed or what menu item is selected. When no text appears on the LCD screen above an Operational Button there is no function assigned.

THE DESKTOP SCREEN

The illustration below shows the control system “Desktop Screen.” This is the default screen. If there are no active Fault or Alert conditions and no user input for approximately 10 minutes the control system will return to this screen automatically.

Model Information: Model information and menu titles are shown in the black bar at the top of the Desktop Screen.

Tank Temperature: Current water temperature as sensed from the immersion Temperature Probe.

Operating Set Point: Temperature at which the control system will maintain tank (water) temperature in the Normal Mode. This line of text will read Economy Set Point whenever the control system is operating in the Economy Mode.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Asme Installation Operation Service Maintenance Limited WarrantyQualified Installer or Service Agency Safe INSTALLATION, USE and ServiceGrounding Instructions General Safety InformationPrecautions Hydrogen GAS Flammable Introduction Table of ContentsSsed Dimensions and Capacities DataFeatures and Components Facts to Consider About the Location ApprovalsModel and Rating Locating the NEW Water Heater Temperature-Pressure Relief Valve Installation RequirementsRequired Ability GeneralThermal Expansion Water Line ConnectionsClosed Water Systems Electrical Data Power CircuitBranch Circuit Heater CircuitsStandard KW Inputs Diagram Small Commercial Wire Diagram Wiring Diagrams208-240V / 3PH 208-240V / 3-1PHDiagram Small Commercial Wire Diagram Single Phase Phase Conversions300-600V / 3PH DiagramFilling the Water Heater OperationInitial Start Up Draining the Water HeaterHigh Temperature Limit Controls ECO Temperature RegulationTemperature Adjustment Thermostat ControlsControl System Operation Control System FeaturesHeating Element Operation Control System NavigationStatus Icons Description Menus Description Operating StatesControl System Menus Temperatures Menu Action Temperature SettingsWater Heater Status Menu Economy Mode Setup MenuCurrent Time Heater In Economy ModeDaily Operating Mode Sun Mon Tue Wed Thu Fri Sat Setpoint Adjustment Value Economy Mode SettingsTime Clock Settings Normal Operation Between Daily Operating Mode SettingsEconomy Mode All Day Water Heater Information Menu Alarm Output Setup MenuDisplay Settings Menu Fault Occurrence Menu Current Fault / Alert MenuFault History Menu Factory Defaults Restore Factory Defaults Restore Factory Defaults MenuTemperature-Pressure Relief Valve Operation MaintenanceMaintenance schedule FlushingOther Scale Removal Lime Scale RemovalProcess for Lime Scale Removal is AS Follows Hard Water Troubleshooting ChecklistTank WarrantyPage Page Technical Support and Parts 800

SSED 5 specifications

State Industries, a prominent player in the heating and cooling sector, has unveiled its latest product, the SSED 5 series. This state-of-the-art water heater stands out in the market due to its unique features and advanced technologies designed to enhance efficiency, durability, and user-friendliness.

One of the key characteristics of the SSED 5 series is its innovative design. Constructed using high-quality materials, the unit is built to withstand the rigors of everyday usage while minimizing corrosion and wear. The external casing is both aesthetically pleasing and functional, providing adequate insulation to reduce heat loss, which in turn improves energy efficiency.

Energy-saving technologies are at the forefront of the SSED 5 series. It utilizes advanced heating elements that offer superior performance compared to traditional models. This includes a high thermal efficiency rating, allowing users to enjoy consistent hot water without incurring high utility bills. Moreover, the SSED 5 is equipped with integrated smart technology that enables users to monitor and control the unit remotely via a mobile app. This feature adds convenience and promotes energy conservation by allowing adjustments to be made according to real-time needs.

The SSED 5’s performance is further enhanced by its user-friendly digital control panel. This intuitive interface simplifies operation, allowing users to easily set their preferred water temperature and access diagnostic information. Safety features are also paramount, with built-in mechanisms to prevent overheating and leaks, ensuring peace of mind during operation.

Additionally, the SSED 5 series is notable for its environmental compliance. A commitment to sustainable practices is evident in its low emissions and energy-efficient operation, which contributes to reducing the overall carbon footprint.

In summary, the State Industries SSED 5 series represents a remarkable advancement in water heater technology. With its robust design, energy efficiency, smart technology integration, user-friendly interface, and safety features, it caters to modern consumers looking for reliable and effective heating solutions. As the demand for efficient and environmentally friendly products continues to rise, the SSED 5 is poised to meet and exceed market expectations. This makes it a leading choice for homeowners seeking innovation and quality in their hot water systems.
Top Page Image Contents