State Industries SSED 5 Safe INSTALLATION, USE and Service, Qualified Installer or Service Agency

Page 2

SAFE INSTALLATION, USE AND SERVICE

Your safety and the safety of others is extremely important in the installation, use, and servicing of this water heater.

Many safety-related messages and instructions have been provided in this manual and on your own water heater to warn you and others of a potential injury hazard. Read and obey all safety messages and instructions throughout this manual. It is very important that the meaning of each safety message is understood by you and others who install, use, or service this water heater.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

 

 

 

 

 

DANGER indicates an imminently hazardous

 

 

 

DANGER

 

 

 

 

 

situation which, if not avoided, will result in

 

 

 

 

 

death or injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING indicates a potentially hazardous

 

 

 

WARNING

 

 

 

 

 

situation which, if not avoided, could result in

 

 

 

 

 

death or injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION indicates a potentially hazardous

 

 

 

CAUTION

 

 

 

 

 

situation which, if not avoided, could result in

 

 

 

 

 

minor or moderate injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION used without the safety alert symbol

 

 

CAUTION

 

indicates a potentially hazardous situation

 

 

 

which, if not avoided, could result in property

 

 

 

 

 

damage.

 

 

 

 

 

 

All safety messages will generally tell you about the type of hazard, what can happen if you do not follow the safety message, and how to avoid the risk of injury.

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potential exposure to such substances.

This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. This appliance can cause low level exposure to some of the substances listed in the act.

IMPORTANT DEFINITIONS

•QUALIFIED INSTALLER OR SERVICE AGENCY:

Installation and service of this water heater requires ability equivalent to that of a Qualified Agency (as defined by ANSI below) in the field involved. Installation skills such as plumbing and electrical supply are required in addition to electrical testing skills when performing service.

•ANSI Z223.1 2006 Sec. 3.3.83:

“Qualified Agency” - “Any individual, firm, corporation or company that either in person or through a representative is engaged in and is responsible for (a) the installation, testing or replacement of gas piping or (b) the connection, installation, testing, repair or servicing of appliances and equipment; that is experienced in such work; that is familiar with all precautions required; and that has complied with all the requirements of the authority having jurisdiction.”

If you are not qualified (as defined by ANSI above) and licensed or certified as required by the authority having jurisdiction to perform a given task do not attempt to perform any of the procedures described in this manual. If you do not understand the instructions given in this manual do not attempt to perform any procedures outlined in this manual.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation Operation Service Maintenance Limited Warranty AsmeSafe INSTALLATION, USE and Service Qualified Installer or Service AgencyGrounding Instructions General Safety InformationPrecautions Hydrogen GAS Flammable Table of Contents IntroductionDimensions and Capacities Data SsedFeatures and Components Facts to Consider About the Location ApprovalsModel and Rating Locating the NEW Water Heater Required Ability Installation RequirementsTemperature-Pressure Relief Valve GeneralThermal Expansion Water Line ConnectionsClosed Water Systems Branch Circuit Power CircuitElectrical Data Heater CircuitsStandard KW Inputs 208-240V / 3PH Wiring DiagramsDiagram Small Commercial Wire Diagram 208-240V / 3-1PHPhase Conversions Diagram Small Commercial Wire Diagram Single PhaseDiagram 300-600V / 3PHInitial Start Up OperationFilling the Water Heater Draining the Water HeaterTemperature Adjustment Temperature RegulationHigh Temperature Limit Controls ECO Thermostat ControlsHeating Element Operation Control System FeaturesControl System Operation Control System NavigationStatus Icons Description Menus Description Operating StatesControl System Menus Temperatures Menu Temperature Settings ActionEconomy Mode Setup Menu Water Heater Status MenuCurrent Time Heater In Economy ModeDaily Operating Mode Sun Mon Tue Wed Thu Fri Sat Economy Mode Settings Setpoint Adjustment ValueTime Clock Settings Normal Operation Between Daily Operating Mode SettingsEconomy Mode All Day Water Heater Information Menu Alarm Output Setup MenuDisplay Settings Menu Fault Occurrence Menu Current Fault / Alert MenuFault History Menu Restore Factory Defaults Menu Factory Defaults Restore Factory DefaultsMaintenance schedule MaintenanceTemperature-Pressure Relief Valve Operation FlushingOther Scale Removal Lime Scale RemovalProcess for Lime Scale Removal is AS Follows Troubleshooting Checklist Hard WaterWarranty TankPage Page Technical Support and Parts 800

SSED 5 specifications

State Industries, a prominent player in the heating and cooling sector, has unveiled its latest product, the SSED 5 series. This state-of-the-art water heater stands out in the market due to its unique features and advanced technologies designed to enhance efficiency, durability, and user-friendliness.

One of the key characteristics of the SSED 5 series is its innovative design. Constructed using high-quality materials, the unit is built to withstand the rigors of everyday usage while minimizing corrosion and wear. The external casing is both aesthetically pleasing and functional, providing adequate insulation to reduce heat loss, which in turn improves energy efficiency.

Energy-saving technologies are at the forefront of the SSED 5 series. It utilizes advanced heating elements that offer superior performance compared to traditional models. This includes a high thermal efficiency rating, allowing users to enjoy consistent hot water without incurring high utility bills. Moreover, the SSED 5 is equipped with integrated smart technology that enables users to monitor and control the unit remotely via a mobile app. This feature adds convenience and promotes energy conservation by allowing adjustments to be made according to real-time needs.

The SSED 5’s performance is further enhanced by its user-friendly digital control panel. This intuitive interface simplifies operation, allowing users to easily set their preferred water temperature and access diagnostic information. Safety features are also paramount, with built-in mechanisms to prevent overheating and leaks, ensuring peace of mind during operation.

Additionally, the SSED 5 series is notable for its environmental compliance. A commitment to sustainable practices is evident in its low emissions and energy-efficient operation, which contributes to reducing the overall carbon footprint.

In summary, the State Industries SSED 5 series represents a remarkable advancement in water heater technology. With its robust design, energy efficiency, smart technology integration, user-friendly interface, and safety features, it caters to modern consumers looking for reliable and effective heating solutions. As the demand for efficient and environmentally friendly products continues to rise, the SSED 5 is poised to meet and exceed market expectations. This makes it a leading choice for homeowners seeking innovation and quality in their hot water systems.
Top Page Image Contents