White W2500 manual Threader

NEEDLE			THREADER
1.	Feed the thread through the						thread guide of needle clamp
	as illustrated. Raise the					presser foot. Raise the needle
	bar to	highest position,			and		pull	the thread leaving about
	4” (10	cm)	clear.
2.	Lower the		presser foot.		Set the needle threader ensuring
	the hooking fork enters					into	the	needle hole.
3.	Hold the thread with the					needle		threader with your hand.
4.	Guide	the	thread	into	hooking			fork and pull the thread
	with your another			hand.

5.	Move the needle threader backwards				slightly.	Then
	release the hand which is			pulling the thread.
6.	Take	the	needle threader off the needle		clamp.
7.	Pull	the	thread away from	you.

For

right

needle

I

Para

Ia

aguja

derecha

I

Pour

aiguille

droite

/

‘IP4W

/

‘/!

jjip

iIIwi. -4P‘:irø’-

- di!F

/

<

j4r,