Husqvarna E10 manual Changing the Bulb

Page 10

CHANGING THE BULB

Attention:

Disconnect the machine from the power supply by removing the plug from the main socket!

Replace bulb with same type rated 10 watts (110-120V) or 15 watts (220-240V).

-Loosen screw (A) as illustrated. (1)

-Remove the cover (B).

-Unscrew the bulb and ﬁt new one (C). (2)

-Replace the cover and tighten screw.

Should there be any problem, ask your local dealer for advice.

10

Image 10

Contents E10 Important Safety Instructions Congratulations List of Contents Principal Parts of the Machine Page Accessories Fitting the SNAP-IN Accessory BOX Sewing light Connecting the Machine to Power SourceFoot control For USA and CanadaChanging the Bulb Adjust Presser Foot Pressure TWO-STEP Presser Foot LeverAttaching the presser foot Attaching the Presser Foot SHANK/ AnkleAttaching the presser foot holder Removing the presser footWinding the Bobbin Please NoteInserting the Bobbin Inserting the Needle Threading the Upper Thread Thread Tension Bringing UP the Bobbin Thread Removing the Fabric Reverse SewingCutting the Thread Matching Needle / Fabric / Thread NEEDLE, FABRIC, Thread Selection GuideStraight stitching center needle position Straight StitchingStraight stitching right needle position Function of stitch length dial while zigzaging Zigzag StitchingStitch length dial Preparation HOW to SEW ButtonholesTo prepare the fabric Tips Blind HEM Zippers and Piping Step ZIG-ZAG PatchingTriple straight stitch Stitch SelectionTriple zig-zag Cleaning and lubricating the hook MaintenanceCleaning the feed dog Remove the stitch plateTrouble Shooting Guide Problem Cause Correction