Husqvarna E10 manual Blind HEM

Page 25

BLIND HEM

For hems, curtains, trousers, skirts, etc.

Select	Blind hem for stretch fabrics.
Select	Blind hem for woven fabrics.

Snap on Blind hem foot. (1)

Stitch length 1.5-2.5

Note:

It takes practice to sew blind hems.

Always make a sewing test ﬁrst.

Fold the fabric as illustrated with the wrong side up. (2)

Place the fabric under the foot. Turn the handwheel forwards by hand until the needle swings fully to the left. It should just pierce the fold of the fabric. (3)

Adjust the guide on the foot (4) by turning the knob (5) so that the guide just rests against the fold.

Sew slowly, by pressing the foot control lightly guiding the fabric along the edge of the guide.

Stitch length dial

Wrong side

Right side

25

Image 25

Contents E10 Important Safety Instructions Congratulations List of Contents Principal Parts of the Machine Page Accessories Fitting the SNAP-IN Accessory BOX Foot control Connecting the Machine to Power SourceSewing light For USA and CanadaChanging the Bulb TWO-STEP Presser Foot Lever Adjust Presser Foot PressureAttaching the presser foot holder Attaching the Presser Foot SHANK/ AnkleAttaching the presser foot Removing the presser footPlease Note Winding the BobbinInserting the Bobbin Inserting the Needle Threading the Upper Thread Thread Tension Bringing UP the Bobbin Thread Removing the Fabric Reverse SewingCutting the Thread NEEDLE, FABRIC, Thread Selection Guide Matching Needle / Fabric / ThreadStraight stitching center needle position Straight StitchingStraight stitching right needle position Function of stitch length dial while zigzaging Zigzag StitchingStitch length dial Preparation HOW to SEW ButtonholesTo prepare the fabric Tips Blind HEM Zippers and Piping Patching Step ZIG-ZAGTriple straight stitch Stitch SelectionTriple zig-zag Cleaning the feed dog MaintenanceCleaning and lubricating the hook Remove the stitch plateProblem Cause Correction Trouble Shooting Guide