ATTACHING THE PRESSER FOOT SHANK/ ANKLE
Attaching the presser foot holder
Raise the presser foot bar (a). (1)
Attach the presser foot shank/ankle (b) as illustrated.
Attaching the presser foot
Lower the presser foot shank/ankle (b) until the
Raise the lever (e).
Lower the presser foot shank/ankle (b) and the presser foot (f) will engage automatically.
Removing the presser foot
Raise the presser foot. (3)
Raise the lever (e) and the foot disengages.
Attaching the seam guide
Attach the seam guide (g) in the slot on the shank/ankle as illustrated.
Adjust according to need for hems, pleats, quilting, etc. (4)
Attention:
Turn power switch to off (“O”) when carrying out any of the above operations!
12