Husqvarna E10 manual TWO-STEP Presser Foot Lever, Adjust Presser Foot Pressure

Page 11

TWO-STEP PRESSER FOOT LEVER

When sewing several layers or thick fabrics, the presser foot can be raised to extra high for easy positioning of the work. (A)

ADJUST PRESSER FOOT PRESSURE

The presser foot pressure of the machine has been pre-set and usually requires no readjustment for most fabrics (light-or-heavy weight).

Tighten presser adjusting screw

Loosen

However, if you need to adjust the presser foot pressure, turn the presser adjusting screw with a coin.

For sewing very thin fabric, loosen the pressure by turning the screw counter clockwise for less pressure on the fabric, and for heavy fabric, tighten by turning it clockwise for more pressure on the fabric.

-

+

11

Image 11

Contents E10 Important Safety Instructions Congratulations List of Contents Principal Parts of the Machine Page Accessories Fitting the SNAP-IN Accessory BOX For USA and Canada Connecting the Machine to Power SourceFoot control Sewing lightChanging the Bulb TWO-STEP Presser Foot Lever Adjust Presser Foot PressureRemoving the presser foot Attaching the Presser Foot SHANK/ AnkleAttaching the presser foot holder Attaching the presser footPlease Note Winding the BobbinInserting the Bobbin Inserting the Needle Threading the Upper Thread Thread Tension Bringing UP the Bobbin Thread Cutting the Thread Reverse SewingRemoving the Fabric NEEDLE, FABRIC, Thread Selection Guide Matching Needle / Fabric / ThreadStraight stitching right needle position Straight StitchingStraight stitching center needle position Stitch length dial Zigzag StitchingFunction of stitch length dial while zigzaging To prepare the fabric HOW to SEW ButtonholesPreparation Tips Blind HEM Zippers and Piping Patching Step ZIG-ZAGTriple zig-zag Stitch SelectionTriple straight stitch Remove the stitch plate MaintenanceCleaning the feed dog Cleaning and lubricating the hookProblem Cause Correction Trouble Shooting Guide