Husqvarna E10 manual Bringing UP the Bobbin Thread

Page 18

BRINGING UP THE BOBBIN THREAD

Hold the upper thread with the left hand. Turn the handwheel towards you until the needle is raised. (1)

Pull on the upper thread to bring the bobbin thread up through the stitch plate hole.

Place both threads to the back under the presser foot. (2)

18

Image 18

Contents E10 Important Safety Instructions Congratulations List of Contents Principal Parts of the Machine Page Accessories Fitting the SNAP-IN Accessory BOX Sewing light Connecting the Machine to Power SourceFoot control For USA and CanadaChanging the Bulb Adjust Presser Foot Pressure TWO-STEP Presser Foot LeverAttaching the presser foot Attaching the Presser Foot SHANK/ AnkleAttaching the presser foot holder Removing the presser footWinding the Bobbin Please NoteInserting the Bobbin Inserting the Needle Threading the Upper Thread Thread Tension Bringing UP the Bobbin Thread Reverse Sewing Removing the FabricCutting the Thread Matching Needle / Fabric / Thread NEEDLE, FABRIC, Thread Selection GuideStraight Stitching Straight stitching center needle positionStraight stitching right needle position Zigzag Stitching Function of stitch length dial while zigzagingStitch length dial HOW to SEW Buttonholes PreparationTo prepare the fabric Tips Blind HEM Zippers and Piping Step ZIG-ZAG PatchingStitch Selection Triple straight stitchTriple zig-zag Cleaning and lubricating the hook MaintenanceCleaning the feed dog Remove the stitch plateTrouble Shooting Guide Problem Cause Correction