Husqvarna E10 manual Straight Stitching, Straight stitching center needle position

STRAIGHT STITCHING

Straight stitching center needle position

Turn the stitch selector dial so that the “A” appears in the stitch display window.

Snap on the standard presser foot.

Adjust the stitch length by turning the stitch length dial to the desired stitch length. 2.5 is standard stitch length.

To get the reinforced triple straight stitch, turn the stitch length dial to position “S1”.

Straight stitching right needle position

Turn the stitch selector dial so that the “B” appears in the stitch display window.

Adjust the stitch length by turning the stitch length dial to the desired stitch length.

To get the reinforced triple straight stitch, turn the stitch length dial to position “S1”.

Suggested stitch lengths: 2.0 for lightweight fabrics

2.5for medium weight fabrics

3.0for heavy weight fabrics 4.0-5.0 for basting

S1 for stretch fabrics

Stitch length dial

Stitch display

Stitch selection dial

Reverse sewing lever

Straight stitch

21