Pella 81DU0100 Sealing the Door to, Exterior Wall Cladding, HwhulruIdfhRiWkhGrru

Page 16

7SEALING THE DOOR TO THE

EXTERIOR WALL CLADDING (continued)

A.Insert backer rod into the space around the

GRRUVRWKHUHLVDSSUR[LPDWHO\WR clearance between the backer rod and the

H[WHULRUIDFHRIWKHGRRU

Note: Backer rod adds shape and depth for the sealant line.

B. Apply a bead of high quality exterior grade

sealant to the entire perimeter of the door.

C. Shape, tool and clean excess sealant. When	7A
ﬁnished, the sealant should be the shape of

an hourglass.

D.Remove plastic guards at the base of the door once construction is complete.

E.Install the hardware. Refer to the instructions

LQFOXGHGLQWKHKDUGZDUHER[

Image 16

Contents Pella Corporation Part Number 81DU0100 Instrucciones en español en el reversoRemember to USE Appropriate Personal Protective Equipment WideRough Opening Preparation Rough Opening Preparation For Doors Using Optional Sill PAN GO to StepGO to Step Apply sill ﬂashing tape. Cut a Optional Sill Pan InstructionsCut two 9 pieces of ﬂashing tape with a RIWKHWDSHDSSOLHGWRWKHVLGHŶDQJH7KH Prepare the Door for InstallationDQJOHRQWRWKHHWHULRU Designer Series Doors Setting and Fastening the DoorFor doors with no lock/bore Clip or Frame Screw Installation, go to Step Setting and Fastening the Door3ED Double Doors Only Check door operation. Open and close the door to check forIntegrating the Door to the Water Resistive Barrier Door Frame CornerDoor Replacement in Siding Without Nail FIN Head Flashing Instruction and Rough Opening PreparationApply top ﬂashing tape. Cut a piece of ﬂashing Apply the top ﬂashing paper. Cut one pieceDoor Replacement in Siding Without Nail FIN 0DNHVXUHWKHWDSHLVDSSOLHGKROHVFUHZVLH ORFDWLRQGHWDLOV Out-Swing Screw Locations In-Swing Screw LocationsSee C for Clip Application Details Installation Clip MethodFasten the door to the opening by driving Check the door operation by opening and closing the door Interior Seal6AB 6CA Replacement Frame Sealing the Door to the Exterior Wall CladdingSealing the Door to Exterior Wall CladdingInsert backer rod into the space around HWHULRUIDFHRIWKHGRRUInterior Finishing Finishing InstructionsCare and Maintenance Important Notice Exterior FinishingTroubleshooting Adjustable Strike Latching Issues Issue

7SEALING THE DOOR TO THE

EXTERIOR WALL CLADDING (continued)

A.Insert backer rod into the space around the

H[WHULRUIDFHRIWKHGRRU

LQFOXGHGLQWKHKDUGZDUHER[

H[WHULRUIDFHRIWKHGRRU

LQFOXGHGLQWKHKDUGZDUHER[