England's Stove Works 10-CPM, 40-TRCPM, 49-SCHPM operation manual To remove the Stirrer for cleaning

Page 15

NOTE

If the unit does not start or maintain a fire, you will receive an E-2in the Heat Range and Blower Speed window of the Control Board. If this occurs, wait until unit has cooled completely down and repeat.

Illustration 3

Locking Collar

Hitch Pin

Hitch Pin

Illustration 4

To remove the Stirrer for cleaning

While the unit is COLD and the unit is off, press and hold the “AIR ON TEMP” (i.e. “Air On”) button until the Stirrer is at the “12:00” position (with the 4 prongs pointing up). Pull the hitch pin (marked in Illustration 3). Lifting the burnpot and Stirrer at the same time, remove the Stirrer from the burnpot. Clean and clear all holes in the burnpot and replace Stirrer and burnpot back into the unit.

NOTE: When replacing the burnpot, notice there is a welded piece that is always set toward the back of the Firebox. Also, be sure to replace the hitch pin.

15

IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING

CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.

ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE

TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Must be maintained Model Numbers 10-CPM 49-TRCPM 49-SHCPMEngland’s Stove Works Technical Support Department 800 Letter from our Technical Support departmentImportant Information Important Notice Important Information Read Before Operating Unit PreparationPage Page Do not Connect to ANY AIR Distribution Duct or System Cherry Pits Burning Solid FuelsWood Pellets Shelled CornThrough the Wall Flue SystemMobile Home Installation Through the CeilingOutside Air Outside Combustion Air Intake Wall Protection Freestanding Pellet/Corn/Multi-fuel InstallationFloor and Wall Protection Floor ProtectionBodily Injury can occur START- UP ProceduresSetting the Stirrer Operating InstructionsFuel not Feeding Correctly To remove the Stirrer for cleaning Fuel Change Procedure Changing from Pellets to CornChanging from Pellets to Cherry Pits Operational Notes CodesSHUT-DOWN Procedure From the Power Source Technical Support DepartmentBox Parts Orders only Monroe, VA Questions Fax Daily Operation Ash Pan Maintenance Semi-Weekly Ash MaintenanceAnnual Maintenance ASH Removal and DisposalMaintenance Replacing the Stirrer Drive Motor Removing Motor and SprocketReplacing the Stirrer Drive Shaft Gaskets FinishGlass Recommended Heat Ranges Control BoardComponent Operation Start Operation END Circuit Board FunctionsAC-109, AC-109BN Lip Trim Accessory ItemsAccessories and Options ThermostatCPM-AP Replacement PartsSee Item numbers on Exploded Diagram for part location Adjusting your Hopper Lid Latch Problem Cause SolutionImproper installation may cause a back draft Problem Cause Solution Page Warranty is not Transferable Page Unit Information Warranty Registration for England’s Stove Works

40-TRCPM, 10-CPM, 49-SCHPM specifications

England's Stove Works is renowned for its commitment to crafting high-quality wood stoves and pellet stoves, and three of their notable products are the 49-SCHPM, 10-CPM, and 40-TRCPM models. Each of these stoves embodies the brand's dedication to efficiency, durability, and performance, making them popular choices for both heating homes and providing a cozy ambiance.

The 49-SCHPM is a powerful pellet stove designed to heat large spaces. It features a spacious hopper that can hold up to 60 pounds of pellets, allowing for extended burn times of up to 80 hours on lower settings. The stove incorporates an easy-to-use digital control board and a built-in thermostat, providing users with precise temperature regulation. This model also boasts a sleek, contemporary design, making it suitable for modern homes while still delivering traditional warmth.

In contrast, the 10-CPM is a compact and efficient pellet stove, ideal for smaller homes or tight spaces. Despite its smaller footprint, it still offers impressive heating capabilities with up to 35,000 BTU output, making it a formidable option for anyone seeking an efficient heat source without sacrificing performance. The 10-CPM features a large viewing window, which enhances the aesthetic appeal and allows users to enjoy the mesmerizing flames. It is also equipped with an automatic ignition system, making it convenient and easy to start.

The 40-TRCPM model showcases England's Stove Works' dedication to versatility. This multi-fuel stove can efficiently burn both wood pellets and corn, allowing homeowners the flexibility to choose their fuel source based on availability and cost. With an output capacity of 40,000 BTU, it is built to dominate larger areas while maintaining a steady heat output. The unit features a sophisticated combustion system that maximizes fuel efficiency and minimizes emissions, aligning with environmentally sustainable practices.

All three models utilize advanced engineering and technology to ensure an optimal burning experience. They come equipped with efficient air circulation systems and adjustable airflow to promote complete combustion, which results in less smoke and creosote buildup. This not only enhances safety but also contributes to the longevity of each unit.

Overall, England's Stove Works has established a strong reputation for producing reliable, efficient, and aesthetically pleasing stoves. The 49-SCHPM, 10-CPM, and 40-TRCPM exemplify the brand's commitment to quality and innovation, making them solid choices for anyone looking to enhance their home's heating system.
Top Page Image Contents