England's Stove Works 49-SCHPM, 10-CPM, 40-TRCPM operation manual Codes, Operational Notes

Page 17

E-Codes

“E-Codes,” or Error Codes, are codes that will appear in the Heat Range and Blower Speed windows of the Control Board if your unit experiences problems. If you receive these codes, wait until the unit is cooled completely down before trying to restart your unit.

If the unit continues to display any E-Code(s), please contact Technical Support at (800) 245-6489 before further attempting to restart your unit.

NOTE: E-0 indicates “No Error” E-2= Fail to Start

E-3= Unit Overfired

If you see the E-3 code displayed on your control board, you have overfired your unit. You must let the unit cool and clean the Firebox and burnpot. Be sure to clean the orifices (holes in the burnpot). You should not burn your unit on High (Heat Range 9) continuously when burning corn. After a couple of hours of burning corn on high, turn the Heat Range to 7 and the Blower Speed to 9. WARNING:

Running the unit on high, when burning corn for long periods, can damage the unit.

OPERATIONAL NOTES

First Fire: When you push the “ON” button, the Control Board will automatically be set at both “Heat Range” and “Blower Speed” to setting “5.” Allow the stove to burn in this manner for at least three (3) hours. This will allow the unit to “cure out” as the paint and the oils from the manufacturing process burn off. We recommend you open doors and windows in your dwelling during this process.

Subsequent Cold Starts: In a cold start situation, the unit should be operated at a “5” setting until the room air blower begins to operate.

IMPORTANT NOTES:

-Please be patient. Your unit has a large burnpot and it takes awhile to equalize (reach maximum heat levels). Do not be concerned by the size of the flame, as this unit gets much hotter than the flame appears.

-Use gloves when filling the hopper.

-If you leave the hopper open too long, the stove will shut down.

NOTE: Press the “ON” button only once on start-up Except when the hopper is empty (when you run out of fuel, or for your first fire, see above), press and hold the “ON” button for 10 seconds to purge the unit. Pressing the “ON” button a second time during the start-up cycle will cause the start-up cycle to begin again.

IMPORTANT: If the unit fails to start properly, or does not properly complete the Shut-Down procedure, open the closest outside door and a window to eliminate the home’s natural draft BEFORE opening the stove’s door or hopper lid. This will allow any smoke to exit through the external air hook-up instead of spilling into the home.

17

IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING

CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.

ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE

TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.

Image 17
Contents Must be maintained Model Numbers 10-CPM 49-TRCPM 49-SHCPMEngland’s Stove Works Technical Support Department 800 Letter from our Technical Support departmentImportant Information Important Notice Important Information Read Before Operating Unit PreparationPage Page Do not Connect to ANY AIR Distribution Duct or System Wood Pellets Burning Solid FuelsShelled Corn Cherry PitsThrough the Wall Flue SystemOutside Air Outside Combustion Air Intake Mobile Home InstallationThrough the Ceiling Floor and Wall Protection Freestanding Pellet/Corn/Multi-fuel InstallationFloor Protection Wall ProtectionSetting the Stirrer START- UP ProceduresOperating Instructions Bodily Injury can occurFuel not Feeding Correctly To remove the Stirrer for cleaning Changing from Pellets to Cherry Pits Fuel Change ProcedureChanging from Pellets to Corn Operational Notes CodesBox Parts Orders only Monroe, VA Questions Fax SHUT-DOWN Procedure From the Power SourceTechnical Support Department Daily Operation Annual Maintenance Maintenance Semi-Weekly Ash MaintenanceASH Removal and Disposal Ash PanMaintenance Replacing the Stirrer Drive Shaft Replacing the Stirrer Drive MotorRemoving Motor and Sprocket Glass GasketsFinish Recommended Heat Ranges Control BoardComponent Operation Start Operation END Circuit Board FunctionsAccessories and Options Accessory ItemsThermostat AC-109, AC-109BN Lip TrimCPM-AP Replacement PartsSee Item numbers on Exploded Diagram for part location Adjusting your Hopper Lid Latch Improper installation may cause a back draft Problem CauseSolution Problem Cause Solution Page Warranty is not Transferable Page Unit Information Warranty Registration for England’s Stove Works

40-TRCPM, 10-CPM, 49-SCHPM specifications

England's Stove Works is renowned for its commitment to crafting high-quality wood stoves and pellet stoves, and three of their notable products are the 49-SCHPM, 10-CPM, and 40-TRCPM models. Each of these stoves embodies the brand's dedication to efficiency, durability, and performance, making them popular choices for both heating homes and providing a cozy ambiance.

The 49-SCHPM is a powerful pellet stove designed to heat large spaces. It features a spacious hopper that can hold up to 60 pounds of pellets, allowing for extended burn times of up to 80 hours on lower settings. The stove incorporates an easy-to-use digital control board and a built-in thermostat, providing users with precise temperature regulation. This model also boasts a sleek, contemporary design, making it suitable for modern homes while still delivering traditional warmth.

In contrast, the 10-CPM is a compact and efficient pellet stove, ideal for smaller homes or tight spaces. Despite its smaller footprint, it still offers impressive heating capabilities with up to 35,000 BTU output, making it a formidable option for anyone seeking an efficient heat source without sacrificing performance. The 10-CPM features a large viewing window, which enhances the aesthetic appeal and allows users to enjoy the mesmerizing flames. It is also equipped with an automatic ignition system, making it convenient and easy to start.

The 40-TRCPM model showcases England's Stove Works' dedication to versatility. This multi-fuel stove can efficiently burn both wood pellets and corn, allowing homeowners the flexibility to choose their fuel source based on availability and cost. With an output capacity of 40,000 BTU, it is built to dominate larger areas while maintaining a steady heat output. The unit features a sophisticated combustion system that maximizes fuel efficiency and minimizes emissions, aligning with environmentally sustainable practices.

All three models utilize advanced engineering and technology to ensure an optimal burning experience. They come equipped with efficient air circulation systems and adjustable airflow to promote complete combustion, which results in less smoke and creosote buildup. This not only enhances safety but also contributes to the longevity of each unit.

Overall, England's Stove Works has established a strong reputation for producing reliable, efficient, and aesthetically pleasing stoves. The 49-SCHPM, 10-CPM, and 40-TRCPM exemplify the brand's commitment to quality and innovation, making them solid choices for anyone looking to enhance their home's heating system.