Axis Communications Q7401 Advanced, Device Settings, Controls, Go to PTZ Guard Tour and click Add

Page 29

AXIS Q7401 Video Encoder

PTZ (Pan Tilt Zoom)

1.Go to PTZ > Guard Tour and click Add.

2.Enter a descriptive name.

3.Specify the pause length between runs.

4.Select an available preset position and click Apply.

5.Specify the Move Speed.

6.Specify the View Time in seconds or minutes.

7.Specify the View Order or select the Random view order option.

8.Click Save.

To modify or remove guard tours, go to PTZ > Guard Tour, select the guard tour in the Guard Tour List and click Modify/Remove.

For more information see the online help .

Advanced

Device Settings

The Device Settings window displays driver specific settings. The appearance of this window can vary depending on the driver installed. Options that can be configured include:

•Driver Specific Settings for Video Source

•Mechanical Limits for Moving Video Source

•Light Control Video Source

•Extended Driver Specific Settings for Video Source

For download and installation information about PTZ drivers for your Axis product please visit www.axis.com/techsup/

Controls

Advanced PTZ settings can be configured under PTZ > Advanced > Controls.

The Panel Shortcut Command Buttons list shows the user-defined buttons that can be accessed from the Live View page’s Ctrl panel. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface. Click Add to add a new shortcut command button.

The following PTZ controls are enabled by default:

•Pan control

•Tilt control

•Zoom control

•Focus control

•Iris control

To disable specific controls, deselect the options under Enable/Disable controls.

Note

Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Axis Q7401 Video Encoder Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis Q7401 Video Encoder Table of ContentsConnectors Performance Considerations Hardware Overview Connectors and Buttons Power LED Indication LED IndicatorsControl Button Status LED IndicationAccess from a Browser Access the ProductSet the Root Password Access from the InternetLive View Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarTo show the manual trigger buttons in the Live View AMC Audio ControlsPreset Positions on Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductPixel Counter Set Up Video StreamsVideo and Audio Click Save to apply the new settings Pixel counter can be accessed fromImage 264Stream Profiles Camera SettingsImage Appearance Video inputOverlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageGo to Events Action Rules Use Overlay Text in an Action RulePrivacy Mask Set Up AudioAudio Modes Audio InputAudio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewGo to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis Q7401 Video Encoder Guard Tour Preset PositionsPTZ Pan Tilt Zoom Advanced Device SettingsControls Go to PTZ Guard Tour and click AddOperator Same as administrator but with lower priority Install PTZ DriverControl Queue OSD MenuCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q7401 Video Encoder Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddTriggers Recipient Types Add RecipientsActions Go to Events Schedules and click Add Set Up Email RecipientsCreate Schedules Go to Events Recurrences and click Add Set Up RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages Security System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Click Install certificate and upload the certificate Go to Setup System Options Security CertificatesDate & Time Audio SupportNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageMount and Unmount SD Card Format SD CardNetwork Share Ports & DevicesPorts COM PortSupport MaintenancePort Status Support OverviewLogs & Reports Plain ConfigScripting File UploadReset to Factory Default Settings Upgrade the Firmware TroubleshootingFirmware To upgrade the product’s firmware Check the FirmwareEmergency Recovery Procedure Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserBasic Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsVideo cannot be recorded Technical Specifications Power Function/group Specifications System ApplicationConnectors WeightFunction Pin Specifications ConnectorsPerformance Considerations RS-485/422 ConnectorAudio Input Audio OutputAxis Q7401 Video Encoder M2.4
Related manuals
Manual 82 pages 36.24 Kb

Q7401 specifications

The Axis Communications Q7401 is a powerful and versatile video encoder designed for transforming analog video signals into high-quality digital streams. This device is part of Axis' comprehensive line of video surveillance solutions, catering to a broad array of applications ranging from retail and transportation to public safety and critical infrastructure monitoring.

One of the standout features of the Q7401 is its support for multiple video formats, including H.264 and Motion JPEG. This versatile encoding capability ensures that users can choose the video quality and bandwidth that best suit their needs. The H.264 compression, in particular, provides a significant reduction in bandwidth and storage requirements while maintaining exceptional video quality, making it an ideal choice for environments where efficiency is crucial.

Equipped with a two-way audio feature, the Q7401 enables real-time communication between the camera and the control center, enhancing situational awareness and response capabilities. This feature is increasingly valuable in security applications, allowing operators to interact proactively with on-site personnel or potential intruders.

The Q7401 also includes advanced features such as video motion detection, which allows the user to set up alerts based on detected motion within predefined areas. This capability reduces the need for constant monitoring, automatically notifying users of potential security breaches or events of interest.

In terms of connectivity, the Axis Q7401 is designed to integrate seamlessly with Axis' network video products. Its compatibility with various Axis applications enhances its functionality, allowing for advanced analytics and intelligent features that can further enhance security measures.

The robust design of the Q7401 ensures reliability in various environments. Its compact form factor allows for easy installation in space-constrained locations, and it operates efficiently in temperature variations, making it suitable for both indoor and outdoor use.

Additionally, the device supports Power over Ethernet (PoE), simplifying the installation process by allowing both power and data transmission through a single cable, thus reducing the amount of wiring required.

Overall, the Axis Communications Q7401 is an excellent choice for organizations looking to upgrade their surveillance systems to meet modern security demands while benefiting from advanced features and reliable performance.
Top Page Image Contents