Axis Communications Q7401 user manual Install PTZ Driver, Control Queue, OSD Menu

Page 30

AXIS Q7401 Video Encoder

PTZ (Pan Tilt Zoom)

OSD Menu

If the PTZ unit supports an internal configuration menu, this can be accessed using the On-Screen Display (OSD). Configure the analog camera by opening and navigating through its internal menu in this display.

Install PTZ Driver

This Axis product supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to obtain the correct driver. To install a PTZ device you need to install the PTZ driver.

To install the PTZ driver go to PTZ> Driver Selection. Browse to find the driver (e.g. driver.ptz) and Upload. If the driver was successfully uploaded, it appears in the Select driver to use drop-down list. From this drop-down list, select the driver to install or remove, and click Save.

Select Activate PTZ to enable PTZ. The address of the connected device appears against Device ID. Choose the Device type from the drop-down list. To find which device type to use, consult the documentation supplied by the PTZ driver.

To complete the installation go to System Options > Ports & Devices > COM Port (see COM Port) and verify the settings.

Control Queue

Note

•The administrator can enable and disable PTZ controls for selected users.

•To identify different users in the viewer group, cookies must be enabled on the client.

•The Control queue polltime is measured in seconds. For more information see the online help .

The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.

A user who belongs to a group (see Users on page 44) with a higher PTZ priority can go before other users in the queue and take control of the product. The order of priority is as follows:

1.Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will be removed from the queue 60 seconds after the last PTZ control command.

2.Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events on page 36). The event will immediately be placed first in the queue except when an administrator is in control.

3.Operator — Same as administrator but with lower priority

4.Guard Tour — A guard tour (see page 28) has PTZ control for an indefinite period of time. It may be overridden by an operator, event or administrator. The guard tour will resume when higher priority groups leave the queue.

5.Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed on to the next viewer in queue.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Axis Q7401 Video Encoder Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q7401 Video EncoderConnectors Performance Considerations Hardware Overview Connectors and Buttons Control Button LED IndicatorsPower LED Indication Status LED IndicationAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordControls on the Live View Go to Setup EventsLive View Manual TriggerTo show the manual trigger buttons in the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio ControlsPreset Positions on How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupSet Up Video Streams Video and AudioPixel Counter Image Pixel counter can be accessed fromClick Save to apply the new settings 264Image Appearance Camera SettingsStream Profiles Video inputGo to Video & Audio Video Stream and select the Image tab OverlayOverlay Image Go to Video & Audio Overlay ImageUse Overlay Text in an Action Rule Go to Events Action RulesAudio Modes Set Up AudioPrivacy Mask Audio InputAudio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersUser Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis Q7401 Video Encoder Preset Positions PTZ Pan Tilt ZoomGuard Tour Controls Device SettingsAdvanced Go to PTZ Guard Tour and click AddControl Queue Install PTZ DriverOperator Same as administrator but with lower priority OSD MenuMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionAudio Detection Applications Install ApplicationGo to Setup Applications Application LicensesAxis Q7401 Video Encoder Convert Event Types to Action Rules Set Up Action RulesEvents Go to Events Action Rules and click AddTriggers Add Recipients ActionsRecipient Types Set Up Email Recipients Create SchedulesGo to Events Schedules and click Add Set Up Recurrences Go to Events Recurrences and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourMount and Unmount SD Card StorageSD Card Format SD CardPorts Ports & DevicesNetwork Share COM PortPort Status MaintenanceSupport Support OverviewScripting Plain ConfigLogs & Reports File UploadReset to Factory Default Settings Firmware To upgrade the product’s firmware TroubleshootingUpgrade the Firmware Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsEmergency Recovery Procedure Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsVideo cannot be recorded Technical Specifications Connectors Function/group Specifications System ApplicationPower WeightConnectors Function Pin SpecificationsAudio Input RS-485/422 ConnectorPerformance Considerations Audio OutputAxis Q7401 Video Encoder M2.4
Related manuals
Manual 82 pages 36.24 Kb

Q7401 specifications

The Axis Communications Q7401 is a powerful and versatile video encoder designed for transforming analog video signals into high-quality digital streams. This device is part of Axis' comprehensive line of video surveillance solutions, catering to a broad array of applications ranging from retail and transportation to public safety and critical infrastructure monitoring.

One of the standout features of the Q7401 is its support for multiple video formats, including H.264 and Motion JPEG. This versatile encoding capability ensures that users can choose the video quality and bandwidth that best suit their needs. The H.264 compression, in particular, provides a significant reduction in bandwidth and storage requirements while maintaining exceptional video quality, making it an ideal choice for environments where efficiency is crucial.

Equipped with a two-way audio feature, the Q7401 enables real-time communication between the camera and the control center, enhancing situational awareness and response capabilities. This feature is increasingly valuable in security applications, allowing operators to interact proactively with on-site personnel or potential intruders.

The Q7401 also includes advanced features such as video motion detection, which allows the user to set up alerts based on detected motion within predefined areas. This capability reduces the need for constant monitoring, automatically notifying users of potential security breaches or events of interest.

In terms of connectivity, the Axis Q7401 is designed to integrate seamlessly with Axis' network video products. Its compatibility with various Axis applications enhances its functionality, allowing for advanced analytics and intelligent features that can further enhance security measures.

The robust design of the Q7401 ensures reliability in various environments. Its compact form factor allows for easy installation in space-constrained locations, and it operates efficiently in temperature variations, making it suitable for both indoor and outdoor use.

Additionally, the device supports Power over Ethernet (PoE), simplifying the installation process by allowing both power and data transmission through a single cable, thus reducing the amount of wiring required.

Overall, the Axis Communications Q7401 is an excellent choice for organizations looking to upgrade their surveillance systems to meet modern security demands while benefiting from advanced features and reliable performance.
Top Page Image Contents