Axis Communications Q7401 user manual System Options, Security, Users, IP Address Filter

Page 44

AXIS Q7401 Video Encoder

System Options

System Options

Security

Users

User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page.

The user list displays authorized users and user groups (access levels):

Viewer - Access to the Live View page

Operator - Access to the Live View page and to all settings except System Options

Administrator - Unrestricted access to all settings; can add, modify and remove other users.

Under HTTP/RTSP Password Settings, select the type of password to allow. You may need to allow unencrypted passwords if there are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need

to log in again and be configured to use this functionality.

Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.

Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.

Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should be made before using the Axis product.

ONVIF

ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperablity between different vendor products, increased flexibility , reduced cost and future-proof systems.

By creating a user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For more information see www.onvif.org

IP Address Filter

IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.

The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).

HTTPS

HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a web protocol providing encrypted browsing. HTTPS can also be used by users and clients to verify that the correct device is being accessed. The security level provided by HTTPS is considered adequate for most commercial exchanges.

The Axis product can be configured to require HTTPS when users from different user groups (administrator, operator, viewer) log in.

To use HTTPS, an HTTPS certificate must first be installed. Go to System Options > Security > Certificates to install and manage certificates. See Certificates on page 45.

To enable HTTPS on the Axis product:

1. Go to System Options > Security > HTTPS

44

Image 44
Contents Axis Q7401 Video Encoder About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q7401 Video EncoderConnectors Performance Considerations Hardware Overview Connectors and Buttons LED Indicators Power LED IndicationControl Button Status LED IndicationAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordGo to Setup Events Live ViewControls on the Live View Manual TriggerAxis Media Control viewer toolbar PTZ ControlsTo show the manual trigger buttons in the Live View AMC Audio ControlsPreset Positions on Axis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupPixel Counter Set Up Video StreamsVideo and Audio Pixel counter can be accessed from Click Save to apply the new settingsImage 264Camera Settings Stream ProfilesImage Appearance Video inputOverlay Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageUse Overlay Text in an Action Rule Go to Events Action RulesSet Up Audio Privacy MaskAudio Modes Audio InputAudio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis Q7401 Video Encoder Guard Tour Preset PositionsPTZ Pan Tilt Zoom Device Settings AdvancedControls Go to PTZ Guard Tour and click AddInstall PTZ Driver Operator Same as administrator but with lower priorityControl Queue OSD MenuDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Install Application Go to Setup ApplicationsApplications Application LicensesAxis Q7401 Video Encoder Set Up Action Rules EventsConvert Event Types to Action Rules Go to Events Action Rules and click AddTriggers Recipient Types Add RecipientsActions Go to Events Schedules and click Add Set Up Email RecipientsCreate Schedules Set Up Recurrences Go to Events Recurrences and click AddRecordings Recording ListContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages System Options SecurityUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Go to Setup System Options Security Certificates Click Install certificate and upload the certificateDate & Time Audio SupportBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage SD CardMount and Unmount SD Card Format SD CardPorts & Devices Network SharePorts COM PortMaintenance SupportPort Status Support OverviewPlain Config Logs & ReportsScripting File UploadReset to Factory Default Settings Troubleshooting Upgrade the FirmwareFirmware To upgrade the product’s firmware Check the FirmwareSymptoms, Possible Causes and Remedial Actions Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserBasic Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsVideo cannot be recorded Technical Specifications Function/group Specifications System Application PowerConnectors WeightConnectors Function Pin SpecificationsRS-485/422 Connector Performance ConsiderationsAudio Input Audio OutputAxis Q7401 Video Encoder M2.4
Related manuals
Manual 82 pages 36.24 Kb

Q7401 specifications

The Axis Communications Q7401 is a powerful and versatile video encoder designed for transforming analog video signals into high-quality digital streams. This device is part of Axis' comprehensive line of video surveillance solutions, catering to a broad array of applications ranging from retail and transportation to public safety and critical infrastructure monitoring.

One of the standout features of the Q7401 is its support for multiple video formats, including H.264 and Motion JPEG. This versatile encoding capability ensures that users can choose the video quality and bandwidth that best suit their needs. The H.264 compression, in particular, provides a significant reduction in bandwidth and storage requirements while maintaining exceptional video quality, making it an ideal choice for environments where efficiency is crucial.

Equipped with a two-way audio feature, the Q7401 enables real-time communication between the camera and the control center, enhancing situational awareness and response capabilities. This feature is increasingly valuable in security applications, allowing operators to interact proactively with on-site personnel or potential intruders.

The Q7401 also includes advanced features such as video motion detection, which allows the user to set up alerts based on detected motion within predefined areas. This capability reduces the need for constant monitoring, automatically notifying users of potential security breaches or events of interest.

In terms of connectivity, the Axis Q7401 is designed to integrate seamlessly with Axis' network video products. Its compatibility with various Axis applications enhances its functionality, allowing for advanced analytics and intelligent features that can further enhance security measures.

The robust design of the Q7401 ensures reliability in various environments. Its compact form factor allows for easy installation in space-constrained locations, and it operates efficiently in temperature variations, making it suitable for both indoor and outdoor use.

Additionally, the device supports Power over Ethernet (PoE), simplifying the installation process by allowing both power and data transmission through a single cable, thus reducing the amount of wiring required.

Overall, the Axis Communications Q7401 is an excellent choice for organizations looking to upgrade their surveillance systems to meet modern security demands while benefiting from advanced features and reliable performance.