Hoover UH70600 manual Headlight replace- ment, Belt replacement, How to reattach filter door

Page 10

3-6

C

How to reattach filter door

The filter door is designed with a “break- away“ feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges (C) of cover with slots on sides of filter area.

Press door back into place.

Check brush roll chan- nels

Because your WindTunnel™ cleaner picks up so well, we strongly recom- mend you check for debris accumulation in the channels next to the brush roll when you check the filters. Removing this debris will help maintain you clean- er’s excellent pick up and suction. Remove debris as follows:

Disconnect cleaner from electrical outlet.

Check for debris accumulation by removing bottom plate (Fig. 3-9) and looking in the channels next to the brush roll (Fig. 3-18).

Remove any accumulation.

Reposition bottom plate (Fig. 3-13).

Headlight replace- ment

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313101.

3-7

Removing lens

Disconnect cleaner from electrical outlet.

Using a Phillips screwdriver, remove the two screws as shown and lift off lens.

3-8

Installing bulb and replacing lens

Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.

Excessive force is not required.

Reposition lens and secure with the two screws.

Belt replacement

The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sure they are in good condition.

The flat (wide) belt is described below; the other is described under “Brush roll replacement”.

When to replace

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

To check the flat belt, remove bottom plate as shown in Fig. 3-9. Replace belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only genuine HOOVER belts with your clean- er. When purchasing a new belt, ask for: Flat belt - HOOVER part No. 38528035 (belt package no. 40201170).

3-9

A

Replacing flat belt

Removing bottom plate

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

Place handle in low position and turn cleaner over so bottom side is up.

Remove the 4 screws as shown with a Phillips screw driver.

Lift off bottom plate (A).

3-10

B

C

Removing belt

Flat belt (B) operates the self-propel fea- ture and indirectly drives the brush roll.

Remove used belt (B) from large pulley

(C) and discard.

10

3-11

D

Positioning back of belt

With lettering on outside of belt, slide new belt over motor shaft (D).

3-12

C

Positioning front of belt

Place other end of belt over large pulley

(C)while rolling the pulley in direction shown.

Note: Extra effort may be required to stretch belt onto pulley.

Image 10
Contents Self-Propelled WindTunnel with Powered Hand Tool by Hoover Fill in and retain Review this manual before Operating cleanerEnglish pp.1-14 Carton contents IndexStep I Attach handle OperationsSelf-propel feature Cleaner descriptionON-OFF Switch Transporting cleanerFeature some models only Carrying cleanerCarpet height adjustment Handle positionsCleaning tools Maintenance Secondary and final filters Where to buy What to buyCleaning secondary filter Changing filter bagHeadlight replace- ment Belt replacementHow to reattach filter door Check brush roll chan- nelsBrush roll replacement Replacing brush rollBelt replacement Powered hand toolAgitator brush roll replacement How to replaceTrouble shooting ServiceHoover Cleaning Performance LubricationClearing blockages Full One Year WarrantyDomestic Use Lea este manual antes de Usar la aspiradora Manual del usuarioAnote y guarde Español págCómo usar IndiceCómo ensamblar la aspiradora Contenido de la caja4Para trasladar 2Interruptor de encender-apagar3Mecanismo de autopropulsión 5Para transportarMantenimiento Reemplazo del foco delantero Filtros secundario y finalReemplazo de las correas Reemplazo del rodillo de escobillas Accesorio de mano turboaccionadoLocalizacion de averias 1Inspección del paso de aire Un año de garantía totalDesatascamiento de obstrucciones 2Comprobación debajo de la place inferiorRemplir et à conserver Manuel de lutilisateurLire ce manuel avant dutiliser laspirateur Description de l’aspi- rateur Mode d’emploiAssemblage de l’aspirateur Contenu de la caisse2Commutateur ON- OFF marche-arrêt 4Déplacement de l’aspirateur9Commande d’ agitateur 3Fonction d’auto- propulsionEntretien Remplacement de la courroie 5Remplacement du filtre finalRemplacement du phare 14Remplacement de l’agitateurAccessoire portatif à turbine Les peignes latérauxDisjoncteur thermique DépannageGraissage Réparations1Inspection du passage de l’air Garantie d’un anDébouchages 2Vérification sous la plaque inférieurePage Hoover y Son marcas registradas Hoover et

UH70600 specifications

The Hoover UH70600 is a powerful upright vacuum cleaner that stands out in the crowded market of home cleaning appliances. Famous for its efficiency and user-friendly design, the UH70600 is tailored to deliver exceptional cleaning performance on various surfaces, making it an ideal choice for households with diverse flooring types.

One of the key features of the Hoover UH70600 is its WindTunnel technology. This innovative system creates strong suction by channeling airflow through multiple suction pathways, which efficiently lifts and removes dirt and debris from carpets and hard floors. This ensures that users can achieve a deep clean without having to go over the same area multiple times.

The UH70600 is equipped with a HEPA filtration system that captures 99.97% of dust and allergens as small as 0.3 microns. This is particularly beneficial for allergy sufferers or households with pets, as it helps to maintain cleaner air quality while trapping allergens within the vacuum. The washable filter further enhances convenience, allowing users to maintain optimal performance with minimal hassle.

In terms of versatility, the Hoover UH70600 features a range of attachments that enable users to clean different surfaces and hard-to-reach areas. The included tools, such as a crevice tool, dusting brush, and upholstery nozzle, allow for effective cleaning of furniture, staircases, and tight spaces. This versatility ensures that every nook and cranny can be effectively cleaned, making the UH70600 a thoroughly comprehensive cleaning solution.

Another useful characteristic of the UH70600 is its large dust bin capacity, which allows for longer cleaning sessions without the need for frequent emptying. The bin is also easy to detach and empty, making the vacuum maintenance a breeze. Additionally, it comes with a 12-foot extended reach hose, ensuring that even high places or areas behind large furniture are easily accessible.

The design of the Hoover UH70600 emphasizes user comfort and ease of use. It features a lightweight body for easy maneuverability, as well as a comfortable handle that reduces strain on the wrist during prolonged cleaning. The vacuum also includes a cord rewind system that quickly wraps up the 27-foot power cord, simplifying storage and making it ready for the next use.

Overall, the Hoover UH70600 combines cutting-edge technology with practical features to provide an efficient and user-friendly cleaning experience. Its powerful suction, advanced filtration, and versatile attachments make it a top choice for those looking to keep their homes immaculate. Whether dealing with pet hair, everyday dirt, or allergens, the Hoover UH70600 is designed to meet the challenges of modern cleaning demands.