Hoover UH70600 Cleaner description, ON-OFF Switch, Self-propel feature, Transporting cleaner

2. How to use

Cleaner description

2-1

1

2 3

5

The assembled cleaner will look like the drawing.

1.	Handle
2.	Self-propel button
3.	ON-OFF switch
4.	Hose
5.	Tool cover

13. Carpet height control:

slide knob to correct

setting for height of

carpet being cleaned.

14. Headlight

15. ‘Dirt FINDER’ display*

16. Embedded ‘Dirt FINDER’

sensitivity switch*

4

6

6.	Powered hand tool
7.	Final filter door
8.	Handle release lever:

17.	Check bag indicator
18.	Bag door
19. Cord hooks: wrap

20

step on lever to lower

handle to operating or

cord around hooks for

storage. The top hook

18 7

17

16

8

15

14

139

12 11 10

19

21

24

22 23

	low positions.
9.	Edge groomers
10.	Furniture guard: helps
	prevent cleaner from
	marking furniture.
11.	Automatic brush roll
	indicator*: shows when
	brush roll is rotating or
	stopped.
12.	Brush roll control:
	slide control to “Carpet”
	for cleaning with brush
	roll ON or to “Hard”
	for cleaning with brush
	roll OFF.

	can be rotated right or
	left for easy cord
	release.
20. Carrying handle
21.	Wands
22.	Dusting brush
23.	Furniture nozzle
24.	Crevice tool

*some models only

Operate cleaner only at voltage specified on data plate on bottom of cleaner.

This cleaner is intended for household use.

2-2

A

ON-OFF Switch

Plug cord into electrical outlet.

To turn cleaner ON, push switch up.

To turn cleaner OFF, push switch down.

Note: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

2-3

Self-propel feature

This feature allows you to control how quickly the cleaner moves.

Note: The self-propel feature oper- ates only when the cleaner switch and the self propel button are both ON.

To move forward, push handle for- ward and guide cleaner away from you.

To move backward, gently pull handle back and guide the cleaner toward you.

Guide cleaner carefully at first until you have adjusted to the ease of operation.

For increased control in tight places (e.g., around and under furniture, non- carpeted floors), slide the self-propel button to OFF to deactivate the feature.

2-4

Transporting cleaner

To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward.

Continued ➜

5