The
Bradford White
DEFENDER
Safety System®
SERVICE PROCEDURE
Gas Control
Testing, Disassembly & Replacement (Honeywell)
GAS CONTROL DISASSEMBLY/REASSEMBLY
Step 12. Remove temperature sensor from insertion stick by pulling apart as illustrated below.
Pull in this direction | Temperature sensor |
Insertion stick
Pull in this direction
Step 13. To reassemble Gas Control, follow the previous steps in reverse order. Once Gas Control is reassembled, burner assembly is reinstalled, and the gas supply line is reconnected, resume water supply to water heater. Be sure tank is full of water before relighting.
Step 14. To resume operation, follow the instructions located on the lighting instruction label or the lighting instructions located in the installation and operation manual.
27
27 |
|
| 2 |
|
| ||
|
|
|
|