Dip Switch | Bradford-White Corp TG-199I-N(X), TG237I-N(X) guide

Combustion Blower Dip Switch Settings

To assure optimum efficiency and reduced noise levels, the combustion blower switch has two dip switch settings. Dip switch number 1, the top dip switch, is shipped from the factory set to the ON position to compensate for the maximum vent/air intake length.

Depending upon the vent/air intake length of the installation, dip switch number 1 may need to be adjusted to compensate for the venting system distance.

When the equivalent length of vent pipe, D, is less than 19 feet (5.7 m), move dip switch number 1 to the OFF position.

When the equivalent length of vent pipe, D, is 19 feet (5.7 m) or more, leave dip switch number 1 in the ON position.

Dip switch number 1 is located in the top row of dip switches, 1 through 8 on the PC board. See the following diagram to identify the correct switch. If you do not understand the information concerning the dip switch settings or the location of the dip switch, contact Bradford White Sales (800-532-4020) or Technical Service (800-334-3393) for assistance. Use the following examples and the previous discussion on calculating the equivalent vent length to determine the correct setting for dip switch number 1.

Example #1:

You have 6 feet (1.82 m) of vent pipe and one 90° elbow.

D = 6 + (1 x 6) + (0 x 1.5)

D = 12 feet of equivalent vent pipe

Dip switch number 1 should be moved to OFF position.

Example #2:

You have 15 feet (4.57 m) of vent pipe and two 90° elbows.

D = 15 + (2 x 6) + (0 x 1.5)

D = 27 feet of equivalent vent pipe

Leave dip switch number 1 in the ON position (default setting).

Figure 13. Dip Switch

Settings.

WARNING

Do not alter dip switch number 1 before using the formula and venting charts to determine the equivalent vent length. All other dip switches with the exception of dip switch number 1, shown in the illustration, MUST NOT be altered unless instructed to do so. Unauthorized adjustments can cause property damage, personal injury, scalding, or death.

TG-199I-N(X), TG-237I-N(X)A, TG-150I-N(X), TG237I-N(X), TG-180I-N(X) specifications

Bradford White Corp, a leader in water heating, offers a range of innovative water heaters, including the TG-180I-N(X), TG-237I-N(X), TG-150I-N(X), TG-237I-N(X)A, and TG-199I-N(X) models. These units are designed to deliver energy-efficient performance while ensuring reliability and ease of use for both residential and commercial applications.

One of the main features of the TG series is their robust design, which is built to withstand the rigors of daily use. These models are equipped with a durable steel tank that is glass-lined to prevent corrosion, ensuring a longer lifespan and reduced maintenance needs. The insulation system utilized in these water heaters is designed to minimize heat loss, contributing to overall energy efficiency.

In terms of technology, the TG series utilizes advanced gas burner systems that ensure optimal heating performance. The models feature an atmospheric venting system that is simple to install and maintain, offering great flexibility in terms of placement within a building. Additionally, the inclusion of Bradford White's signature Hydrojet® Total Performance System enhances overall efficiency by reducing sediment buildup, allowing for better heat transfer and increased performance.

Each model in this range is designed with user-friendly controls. The intuitive thermostat settings enable users to easily adjust the water temperature to meet their specific needs. Moreover, these water heaters incorporate safety features such as high-temperature limit switches and a temperature and pressure relief valve, ensuring safe operation.

Another important characteristic of these models is their compliance with industry standards. The TG series meets or exceeds the stringent guidelines set forth by the American National Standards Institute (ANSI) and the National Sanitation Foundation (NSF), demonstrating Bradford White's commitment to quality and safety.

Moreover, the TG series is designed to be environmentally friendly, incorporating features that support lower emissions and energy consumption. By using high-efficiency burners and improved insulation, these models contribute to reduced greenhouse gas emissions, aligning with global sustainability goals.

In summary, the Bradford White Corp TG-180I-N(X), TG-237I-N(X), TG-150I-N(X), TG-237I-N(X)A, and TG-199I-N(X) water heaters are engineered for efficiency, durability, and safety. With advanced features and technologies, they provide reliable hot water solutions for a variety of settings, making them an excellent choice for consumers seeking high-quality water heating options.