3a. Wiring If not pre-wired, As you go -6 on next

4SAFETY BEAM SYSTEM INSTALLATION

WARNING

There should be no electrical power to the operator while installing Safety Beam wires. If you have plugged in the power cord—UNPLUG IT NOW!

NOTE: The operator will not close the door automatically unless the Safety Beam System is installed.

NOTE: For Sensors, screws, wire, and insulated staples locate items and Bag 8 from Box 3.

1. Mounting brackets.

FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM

mark

FIG. 4-1 Mark door frame.

• Mark both sides of garage door frame or wall no
higher than 6" and no lower than 5" above floor.
(Fig. 4-1).
• Hold bracket against door frame or wall.
– Check if brackets extend out from wall far
enough, so tongue of bracket is beyond door,
tracks or any door hardware.
– If not:
a)	Mounting bracket extensions are available
	through an authorized Genie dealer.
b)	Blocks of wood, etc. may be substituted for
	extensions.
• Center bracket on your mark (Fig. 4-2).
• Fasten each with 2 screws (Fig. 4-2).

NOTE: Mounting brackets can be attached to the floor or concrete rim using concrete anchors (not provided).

center of

bracket

FIG. 4-2

Mounting brackets.

SUN

lid

bracket

tongue

FIG. 4-3 Attach sensors to brackets.

2.Mounting Safety Beam Source (Red LED) and Sensor (Green LED).

•If garage has only one garage door.

–Determine which side of garage receives most direct sunlight (Fig. 4-4).

–Red LED should always be on sunny side whenever possible (Fig. 4-4).

•For multiple doors.

–Preventing crossed signals is critical.

–Place source and sensor modules on adjacent doors facing in opposite directions (Fig. 4-4).

NOTE: To help prevent interference from sun, Safety Beam sensor with Green LED may be placed further away from the door opening where it will spend more time in shadow.

•Slide source/sensor onto tongue of bracket until it clicks into place. (Fig. 4-3).

3a. Wiring (If NOT pre-wired).

•Route wire from Safety Beam sensors to power head using method shown in (Fig. 4-5a).

•Securely fasten wires to wall and ceiling

as you go (Fig. 4-6 on next page).

–Use insulated staples.

–Staples should be snug only.

Insulated

Staple

RED	GREEN	GREEN	RED RED	GREEN
LED	LED	LED	LED LED	LED
ONE DOOR		TWO DOOR
GARAGE		GARAGE
GREEN	RED RED	GREEN GREEN		RED
LED	LED LED	LED	LED	LED

THREE DOOR

GARAGE

FIG. 4-4 Safety Beam source and sensor locations.

Red	Green
Source	Sensor

			or
	6 5 4 3 2 1		or	6 5 4 3 2 1

	Dashed Line = striped wire
Power	Dashed Line = striped wire
Head		Solid Line = white wire

FIG. 4-5a Source and sensor wiring methods.

16	PN# 3642036212, 8/09/2007

1022, 1024 specifications

Genie 1024 is a cutting-edge generative AI model that has gained attention for its remarkable capabilities in producing coherent and contextually relevant text. As a significant advancement in natural language processing (NLP), Genie 1024 represents a leap forward in AI technology, allowing for more nuanced understanding and generation of human-like text.

One of the main features of Genie 1024 is its impressive size, denoted by its name. The model boasts 1024 parameters, enabling it to grasp a broad range of linguistic patterns and contextual relationships. This extensive parameter count allows Genie 1024 to generate text that is not only coherent but also stylistically varied, making it suitable for diverse applications, from creative writing to technical documentation.

The architecture of Genie 1024 is based on transformer technology, which has become the de facto standard in NLP due to its ability to handle large datasets and complex relationships in language. This model utilizes self-attention mechanisms, allowing it to weigh the importance of different words in a sentence relative to one another. This capability enhances the model's comprehension and allows it to produce context-aware responses.

Another standout characteristic of Genie 1024 is its training regimen, which incorporates extensive datasets from various domains, including literature, science, and social media. This diverse training corpus equips the model with a rich understanding of language nuances, idioms, and cultural references, thus enabling it to generate responses that resonate with users from different backgrounds.

In terms of usability, Genie 1024 is designed with user-friendliness in mind. Developers and businesses can easily integrate the model into their applications through user-friendly APIs or dedicated platforms. This accessibility paves the way for innovative applications across industry sectors, enhancing customer engagement and automating content creation processes.

Moreover, Genie 1024 places a significant emphasis on ethical and responsible AI use. The team behind the model has implemented guidelines for bias mitigation, promoting fairness and inclusivity in its responses. Users can benefit from comprehensive usage guidelines and support resources that encourage effective deployment while navigating potential challenges.

In summary, Genie 1024 stands out as a remarkable generative AI model that combines advanced transformer architecture, extensive parameters, and diverse training data. With a focus on both functionality and ethical considerations, it opens up new horizons for applications in natural language processing, benefiting both developers and end-users alike.