Genie How to Set and Adjust Limits on Garage Door Openers (Model 1022 and 1024)

Page 19

6DOOR LIMITS

WARNING

Severe injury or death can result if the door closing force is set too high.

Never increase the door closing force above the minimum required to move the door.

Never adjust force to compensate for a sticking or binding door.

Once per month perform CONTACT REVERSE TEST as described on the next page and in Section 10.

SETTING & TESTING OPEN/CLOSE LIMITS

The OPEN (UP) and CLOSE (DOWN) door positions are controlled by making the adjustments on the panel located on the bottom of the power head. The adjustments that can be made are:

Close Travel Limit,

Open Travel Limit,

Maximum Closing Force,

Maximum Opening Force, and

Transmitter Programming.

ENGAGE CHAIN TO CARRIAGE

1.Press and hold the "Close Travel Limit" button until the chain advances and engages carriage (Fig. 6-2).

CLOSE TRAVEL LIMIT

1.Press and hold the "Close Travel Limit" button until the door is fully closed.

2.You can quickly press and release the "Close Travel Limit" button to move the door in small increments. You can also use the "Open Travel Limit" button to move the door slightly in the UP direction.

3.Door is fully closed when the bottom edge of door presses firmly onto the ground.

4.Once the door is in the desired position, press and release the "Down SET Limit" SET button. The LED indicator light light will blink green once. This stores the closed position in memory.

OPEN TRAVEL LIMIT

1.Press and hold the "Open Travel Limit" button to move the door to its fully opened position. This starts the opener moving in the UP direction.

2.Hold the "Open Travel Limit" button until the door is in the fully opened position that you desire, then release this button.

3.You can quickly press and release the "Open Travel Limit" button to move the door in small increments. You can also use the "Close Travel Limit" button to move the door slightly in the DOWN direction.

4.Once the door is in the desired position, press and release the "Open SET Limit" SET button. The LED indicator light will blink green twice. This stores the opened position in memory.

FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM

Limit Controls location on power head.

LED

Open

Open

 

 

Indicator Light

Set Limit

 

Up Force

Travel Limit

 

 

 

Button

OPEN Control

 

 

 

 

 

 

 

 

 

 

 

 

Adjustment

To

 

 

SET

 

 

Garage Door

 

 

 

 

 

 

 

 

 

 

LEARN MANUAL LIMIT

FORCE

 

 

 

 

SET

 

 

Learn

 

 

 

 

 

Code

CODE

Close

Close

CLOSE

Down Force

Button

 

 

 

 

 

Travel Limit Set Limit

 

Control

 

 

 

Button

 

Adjustment

FIG. 6-1 Limit controls.

Carriage

Chain - Master Link (engages to carriage) FIG. 6-2 Engage Chain to Carriage.

PN# 3642036212, 8/09/2007

19

 

Image 19
Contents Model 1022/1024 High Spring Tension Safety InformationMoving Door Electrical ShockOperator Features Table of ContentsSafety Features Do not USE AN Extension Cord Do not USE Alternate Power SuppliesSection Approx Typical Sectional Door InstallationMAX MIN Parts Identification Not Shown Full Size Recommended ToolsDo not Return to Point of Purchase Chain tensioner Piece Rail Hardware Assembled ViewBox Label Example Internal boxes Operator AssemblySplit Rail sections Split Rail assemblyExtend Installation Header and Door Mounting BracketsFinding header bracket mounting location Do not move door spring Mounting the header bracketUnfinished or Open Beam Mounting the assemblyMounting the Operator Angle Iron on Finished CeilingDoor Bracket Install Door ArmsWall Control location Wall Control Installation2a. Wiring If pre-wired 2b. Wiring If not pre-wiredMounting Securely fasten wiresDo not install rear cover yet Power Head With Rear Cover Removed -3 Insert wires3a. Wiring If not pre-wired Mounting Safety Beam Source Red LED and Sensor Green LEDAs you go -6 on next Power Head With Rear Cover Not Shown Cover clips 3b. Wiring pre-wiredRoute wire from ceiling to power head Do not install the white lamp cover at this timeWith Grounded Plug Connecting to PowerWith Permanent Wiring With Power SuppliedClose Travel Limit Limit Controls location on power headDoor Limits Engage Chain to CarriageContact Reverse Test Carriage LockUP/DOWN Force Erase OPEN/CLOSE Travel LimitLost or Stolen Remote Programming Remote ControlsLight bulb Light BULB/LENS InstallationBattery replacement Visor clipDoor balance MaintenanceRoutine Monthly Maintenance Safety Beam SystemCircuit Wiring Diagram Power CordTroubleshooting Guide Operation Possible Problem Solution Troubleshooting Guide Power Head LEDTransmitter Compliance Statement For Answers Call Limited Warranty
Related manuals
Manual 1 pages 40.03 Kb

1022, 1024 specifications

Genie 1024 is a cutting-edge generative AI model that has gained attention for its remarkable capabilities in producing coherent and contextually relevant text. As a significant advancement in natural language processing (NLP), Genie 1024 represents a leap forward in AI technology, allowing for more nuanced understanding and generation of human-like text.

One of the main features of Genie 1024 is its impressive size, denoted by its name. The model boasts 1024 parameters, enabling it to grasp a broad range of linguistic patterns and contextual relationships. This extensive parameter count allows Genie 1024 to generate text that is not only coherent but also stylistically varied, making it suitable for diverse applications, from creative writing to technical documentation.

The architecture of Genie 1024 is based on transformer technology, which has become the de facto standard in NLP due to its ability to handle large datasets and complex relationships in language. This model utilizes self-attention mechanisms, allowing it to weigh the importance of different words in a sentence relative to one another. This capability enhances the model's comprehension and allows it to produce context-aware responses.

Another standout characteristic of Genie 1024 is its training regimen, which incorporates extensive datasets from various domains, including literature, science, and social media. This diverse training corpus equips the model with a rich understanding of language nuances, idioms, and cultural references, thus enabling it to generate responses that resonate with users from different backgrounds.

In terms of usability, Genie 1024 is designed with user-friendliness in mind. Developers and businesses can easily integrate the model into their applications through user-friendly APIs or dedicated platforms. This accessibility paves the way for innovative applications across industry sectors, enhancing customer engagement and automating content creation processes.

Moreover, Genie 1024 places a significant emphasis on ethical and responsible AI use. The team behind the model has implemented guidelines for bias mitigation, promoting fairness and inclusivity in its responses. Users can benefit from comprehensive usage guidelines and support resources that encourage effective deployment while navigating potential challenges.

In summary, Genie 1024 stands out as a remarkable generative AI model that combines advanced transformer architecture, extensive parameters, and diverse training data. With a focus on both functionality and ethical considerations, it opens up new horizons for applications in natural language processing, benefiting both developers and end-users alike.