Allstar Products Group 3000, J3500, 3500-P owner manual Table of Contents

Page 2

TABLE OF CONTENTS

 

Product Features

2

Component Identification/Tools Required

4

Section A: Assembly Instructions

5

Section B: Installation Notes

6

Section C: Installing the Operator

7

Identify Your Door Type

7

Mounting the Front Bracket

8

Mounting the Power Head

9

Door Arm Installation

10

Pushbutton Connection

11

Section D: Auxiliary Equipment

13

Installation of All-Clear

13

Installation of Radio Controls

15

Installation of Deluxe Wall Station

16

Operating Parameters

16

Section F: Operation and Adjustment Instructions

17

Safety Notes

17

Testing the Sensitivity

18

Testing the Reversing System

18

Testing the All-Clear

19

Operating the Deluxe Wall

19

Operator Wiring Diagram

20

Auxiliary Equipment Wiring Diagram

21

Installation Checklist

22

Troubleshooting Guide

23

READ THESE STATEMENTS CAREFULLY AND FOLLOW THE

INSTRUCTIONS CLOSELY.

The Warning and Caution boxes throughout this manual are there to protect you and

your equipment. Pay close attention to these boxes as you follow the manual.

WARNING

Indicates a MECHANICAL

hazard of INJURY OR

DEATH. Gives instructions

to avoid the hazard.

CAUTION

Indicates a MECHANICAL hazard of DAMAGE to your gate, gate operator, or equipment. Gives instructions to avoid the hazard.

WARNING

Indicates an ELECTRICAL

hazard of INJURY OR

DEATH. Gives instructions

to avoid the hazard.

CAUTION

Indicates an ELECTRICAL hazard of DAMAGE to your gate, gate operator, or equipment. Gives instructions to avoid the hazard.

2

Image 2
Contents Series Table of Contents Product Features Optional FeaturesComponent Identification Tools RequiredAssembly Instructions StepImportant Installation To Reduce the Risk of Severe Injury AdjustmentInstalling the Operator Do not Attempt AdjustmentMounting the Front Bracket One High ARC Rise High ARC Rise Horizontal LineOne Piece Doors without Track Raise the opener Mount Power Head to CeilingSectional Doors and One Piece Doors with Track Mounting straps in the slots closest to FrontDoor ARM Connection and Installation Connect the standard wall Push Button provided to Mount at least 5 FT from the floor to prevent small childrenFastening Limit CAM to Chain Connect the Photosystem as follows Auxiliary EquipmentPhotosystem Unit is Within the Limit Marks on the Door Jamb Final Installation Final Alignment and TestInstallation of Radio Controls If the Door is Operating ParametersCheck with Your Local Building Inspector First ONE SECOND, and then Begin Moving Upward104390 Operation and Adjustment Instructions Warni NGTesting the All-Clear Photosystem Security Switch is GarageOperator Wiring Diagram Wiring Auxiliary Equipment Series Connection Receiver FirstInstallation Checklist Solution Troubleshooting GuideSymptom Probable CAUSE/SOLUTION Probable CauseAllstar Corporation Downingtown, PA