Allstar Products Group 6000, J6500, 6500-P owner manual Series

Page 1

INSTALLER: Place this manual in the plastic envelope provided and permanently

attach to the wall near the pushbutton.

INSTALLATION AND OWNER’S MANUAL

6000 SERIES

Residential Vehicular Garage Door Operator

MODELS: 6000, 6500, 6500-P & J6500

107063

As of date of manufacture,

meets all ANSI/UL 325 Safety Requirements for Vehicular Garage Door Operators

Serial #:

Date Installed:

Your Dealer:

READ THIS MANUAL CAREFULLY BEFORE

INSTALLATION OR USE

1

Image 1

Contents Series Table of Contents Standard Features Product FeaturesTools Required Component IdentificationStep Assembly InstructionsAdjustment For These Types of Doors USE 1/3 HP Installing the OperatorUSE 7 FT, 8 FT or 10 FT Rail Match Door Height For These Types of Doors USEHigh ARC Rise High ARC Rise Horizontal Line Mounting the Front Bracket OnePiece Doors with Tracks Without Tracks Sectional Doors and ONE ONE Piece DoorsDoor ARM Connection and Installation InstallingOverhand DoubleKnot ReleaseFastening Limit CAM to Chain Auxiliary Equipment Final InstallationIllustration, left. Check to ensure the Window on the Front Photosystem Unit is Within the Limit Marks on the Door JambTransmitter Final Alignment and TestInstallation of the Super Station Check with Your Local Building Inspector First Operating ParametersIf the Door is Downward108407 R NI N G Operation and AdjustmentTesting the All-Clear Photosystem Operation and Adjustment InstructionsOperator Wiring Diagram Wiring Auxiliary Equipment Installation Checklist Symptom Probable CAUSE/SOLUTION Troubleshooting GuideSolution Probable CauseAllstar Corporation Downingtown, PA