Harman-Kardon AVR 154 owner manual Antennas, Analog Video, Is colored red. See Figure

Page 18

CONNECTIONS

The AVR 154 will not convert analog video signals to the HDMI format, and the on-screen displays are not visible when using an HDMI source. Connect the composite or S-video monitor output (or both, depending on which video connections your sources use) to your video display to view the on-screen menus.

The physical HDMI connection is simple. The connector is shaped for easy plug-in (see Figure 9). If your video display has a DVI input, you may use an HDMI-to-DVI adapter (not included) to connect it to the AVR’s HDMI Output, but the HDMI-to-DVI connection will not carry audio. In addition, your DVI-equipped display should be HDCP (High- Definition Copy Protection)-compliant.

Figure 9 – HDMI Connection

Component video cable

Figure 12 – Component Video

If it’s available on your video display, HDMI is recommended as the best quality connection, followed by component video, S-video and then composite video.

NOTES:

•A composite or S-video connection to your TV is required to view the AVR’s on-screen displays.

•Copy-protected sources are not available at the Component Video Monitor Outputs.

Analog Video

There are three types of analog video connections: composite video, S-video and component video.

Composite video is the basic connection most commonly available. The jack is usually color-coded yellow, and looks like an analog audio jack, although it is important never to confuse the two. Do not plug a composite video cable into an analog or coaxial digital audio jack, or vice versa. Both the chrominance (color) and luminance (intensity) components of the video signal are transmitted using a single cable. See Figure 10.

Composite video cable

Figure 10 – Composite Video

S-video, or “separate” video, transmits the chrominance and luminance components using separate wires contained within a single cable. The plug on an S-video cable contains four metal pins, plus a plastic guide pin. Be careful to line up the plug correctly when you insert it into the jack on the receiver, source or video display. See Figure 11.

S-video cable

Figure 11 – S-Video

Component video separates the video signal into three components – one luminance (“Y”) and two subsampled color signals (“Pb” and “Pr”) – that are transmitted using three separate cables. The “Y” cable is color-coded green, the “Pb” cable is colored blue and the “Pr” cable

is colored red. See Figure 12.

Antennas

The AVR 154 uses separate terminals for the included FM and AM antennas that provide proper reception for the tuner.

The FM antenna uses a 75-ohm F-connector. See Figure 13.

Figure 13 – FM Antenna

The AM loop antenna needs to be assembled. Then connect the two leads to the push-type terminals on the receiver. Although the terminals are color-coded, you may connect either antenna lead to either terminal. See Figure 14.

Figure 14 – AM Antenna

18

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AVR Safety Information Important Safety InstructionsImportant Safety Information Staple Invoice Here Table of Contents Harman Kardon AVR 154 5.1-Channel Audio/Video Receiver IntroductionThank you for choosing Harman Kardon Audio SectionAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsPower Indicator This LED has four possible modes FRONT-PANEL ControlsMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V AUX Controls a device connected to the Auxiliary Input Remote Control FunctionsVideo 3 Controls televisions and other video displays Channel Input Selector Press this button to selectPower On AVR SelectorRemote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioSpeaker Connections Connecting Source Devices to the AVRConnections SubwooferAnalog Audio Audio ConnectionsDigital Audio Video ConnectionsAnalog Video FM antenna uses a 75-ohm F-connector. See FigureAntennas Is colored red. See FigureSpeaker Placement Step Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasComponent video Connect a DVD, SACD, HD-DVD or Blu-ray Disc PlayerConnecting a Component-Video-Equipped Disc Player Connect an Audio/Video Recorder PVR, DVR or TiVoConnecting a Video Recorder Connect a Tape Deck or Any Audio-Only Recorder Connecting a Game Console, Camera or Other DeviceConnect a CD Player or Any Audio-Only Device Connect a Portable Audio PlayerStep Six Plug in AC Power Step Five Connect the Video DisplayStep Seven Insert Batteries in Remote Turn on your source device Enter a code from number 1 aboveStep Nine Turn On the AVR For instructions on these advanced programming functionsTwo steps are required the first time you turn on the AVR Initial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Speaker/Channel Input Indicators Speaker Crossover MenuDelay Adjust Menu Step Four Output Level CalibrationMethod A. Using the Remote Control With the Test Tone Method C. Using the Full-OSD MenuStep Five Configure Sources You are now ready to begin enjoying your new receiverOperation Audio Input Selection HeadphonesSource Selection Video Input SelectionUsing the Tuner Channel Direct InputsWe recommend that you connect this player as follows Recording AUX InputSelecting a Surround Mode Select a Surround Mode RemoteAdvanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundDolby Surround Settings System Settings Default ModesMode Group Enveloping sound field is desired Mode GroupPanorama adjusts wraparound surround effect 0 orSurround Mode Description Incoming Bitstream or Signal DTS StereoPunch-Through Programming Advanced Remote Control FunctionsDim Function To dim the displayMemory Processor ResetResetting the Remote To program, or record a macro, follow these stepsTroubleshooting Guide Appendix VCR, DVR, PVRTable A3 Speaker/Channel Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Source Input Setting Defaults Table A4 Delay Setting DefaultsTable A5 Source Input Settings Table A6 Speaker/Channel SettingsTable A7 Remote Control Codes Table A8 System SettingsTable A9 Remote Control Function List TV VID3PPV Aiwa Table A10 Table A11Table A12 Remote Control Product Codes CD Table A13 Remote Control Product Codes DVDTable A15 Remote Control Product Codes Tape Table A16 Remote Control Product Codes CBLTable A16 AVR 154 Technical Specifications DTS
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.
Top Page Image Contents