Harman-Kardon AVR 154 owner manual Processor Reset, Memory, Resetting the Remote

Page 45

ADVANCED FUNCTIONS

For example, if you wish to watch your TV (programmed into the Video 3 Button) while changing channels using your cable box (Video 2), first press and hold the Video 3 Button until the LED flashes. Then press the Volume Down Button, followed by the Video 2 Button.

To undo punch-through programming, follow the same steps as above, but press the same Input (or AVR) Selector in Steps 1 and 3.

You may reassign the transport control punch-through programming for the AVR, VID2 and VID3 devices to other devices, such as CD. If you wish to remove transport control punch-through altogether for the AVR, VID2 or VID3 device, follow the same procedure as for programming punch-through, but in Step 3 press either of the other two of these three special selector buttons. For example, to remove punch-through transport control from the VID3 device so that pressing any of the transport controls will have no effect, press and hold the VID3 Button until the Program Indicator LED flashes in amber, then press the Play Button, followed by either the AVR or VID2 Button.

Macros

Macros are used to program sequences of up to 19 commands

that are executed with a single button press. Macros are well suited for power on and off commands, or to send out a favorite multidigit channel number with one button press, or to have the ability to send out a code sequence to control a device while the remote is operating another device, but with more flexibility than the built-in punch-through controls.

Some commands may not be programmed into macros: Mute, Dim, Channel Up/Down or any of the surround mode commands.

NOTE: Use caution when programming complicated macros. It isn’t possible to program a pause or delay before sending commands after Power On, and the component may not be ready to respond to commands instantaneously after powering on.

To program, or “record” a macro, follow these steps:

1.Simultaneously press one of the four Macro Buttons or the Power On Button and the Mute Button to enter program mode.

2.Press the Input (or AVR) Selector for each device before you enter commands to be transmitted to that device. This step counts as one of the 19 commands allowed for each macro.

3.For the Power On command, DO NOT press the Power On Button. Press the Mute Button instead.

4.Press the Power Off Button to program the Power Off command.

5.Press the Sleep Button to end the programming process.

It isn’t possible to “edit” a command within a macro. However, you may erase the macro as follows:

1.Simultaneously press and hold the Mute Button and the Macro Button containing the macro until the LED flashes.

2.Press the Surround Button to erase the macro.

Resetting the Remote

To reset the remote to its factory defaults, simultaneously press and hold any Input Selector and the “0” Numeric Key. When the Program LED flashes in amber, enter the code “333”. When the green LED goes out, the remote will have been fully reset.

Processor Reset

There may be instances when you wish to fully reset the AVR 154 to its factory defaults, or if the unit behaves erratically after a power surge.

To correct erratic behavior, first turn the Master Power Switch off and unplug the AC Power Cord for at least 3 minutes. Plug the cord back in and turn the receiver back on. If this doesn’t help, try a system reset.

NOTE: A system reset erases all user configurations, including speaker and level settings and tuner presets. After a reset, you must re-enter all of these settings. If the unit is able to display the configuration settings, note them in the worksheets in the Appendix to facilitate reentry after the reset.

To reset the AVR 154, place the receiver in Standby mode (press the front-panel Standby/On Switch so that the Power Indicator turns amber). Press and hold the front-panel Surround Mode Button for 5 to 10 sec- onds until the RESET message appears in the display.

If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Service centers may be located by visiting our Web site at www.harmankardon.com.

Memory

If the AVR 154 is unplugged or experiences a power outage, it will retain user settings for up to four weeks.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents AVR Important Safety Instructions Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Thank you for choosing Harman Kardon IntroductionHarman Kardon AVR 154 5.1-Channel Audio/Video Receiver Audio SectionAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Power Indicator This LED has four possible modesMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V Video 3 Controls televisions and other video displays Remote Control FunctionsAUX Controls a device connected to the Auxiliary Input Channel Input Selector Press this button to selectAVR Selector Power OnRemote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferDigital Audio Audio ConnectionsAnalog Audio Video ConnectionsAntennas FM antenna uses a 75-ohm F-connector. See FigureAnalog Video Is colored red. See FigureSpeaker Placement Step One Connect the Speakers InstallationStep Two Connect the Subwoofer Step Three Connect the AntennasConnect a DVD, SACD, HD-DVD or Blu-ray Disc Player Component videoConnect an Audio/Video Recorder PVR, DVR or TiVo Connecting a Component-Video-Equipped Disc PlayerConnecting a Video Recorder Connect a CD Player or Any Audio-Only Device Connecting a Game Console, Camera or Other DeviceConnect a Tape Deck or Any Audio-Only Recorder Connect a Portable Audio PlayerStep Six Plug in AC Power Step Five Connect the Video DisplayStep Seven Insert Batteries in Remote Enter a code from number 1 above Turn on your source deviceStep Nine Turn On the AVR For instructions on these advanced programming functionsTwo steps are required the first time you turn on the AVR Initial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Speaker Crossover Menu Speaker/Channel Input IndicatorsStep Four Output Level Calibration Delay Adjust MenuMethod C. Using the Full-OSD Menu Method A. Using the Remote Control With the Test ToneYou are now ready to begin enjoying your new receiver Step Five Configure SourcesOperation Source Selection HeadphonesAudio Input Selection Video Input SelectionUsing the Tuner Channel Direct InputsWe recommend that you connect this player as follows AUX Input RecordingSelect a Surround Mode Remote Selecting a Surround ModeDigital Audio Signals Analog Audio SignalsAdvanced Functions Audio Processing and Surround SoundDolby Surround Settings Default Modes System SettingsPanorama adjusts wraparound surround effect Mode GroupMode Group Enveloping sound field is desired 0 orDTS Stereo Surround Mode Description Incoming Bitstream or SignalDim Function Advanced Remote Control FunctionsPunch-Through Programming To dim the displayResetting the Remote Processor ResetMemory To program, or record a macro, follow these stepsTroubleshooting Guide VCR, DVR, PVR AppendixTable A2 Source Input Setting Defaults Appendix Default settings, worksheets, remote product codesTable A3 Speaker/Channel Setting Defaults Table A4 Delay Setting DefaultsTable A6 Speaker/Channel Settings Table A5 Source Input SettingsTable A8 System Settings Table A7 Remote Control CodesTV VID3 Table A9 Remote Control Function ListPPV Aiwa Table A11 Table A10Table A13 Remote Control Product Codes DVD Table A12 Remote Control Product Codes CDTable A16 Remote Control Product Codes CBL Table A15 Remote Control Product Codes TapeTable A16 DTS AVR 154 Technical Specifications
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.
Top Page Image Contents