Harman-Kardon AVR 154 owner manual Initial Setup, Using the On-Screen Menu System

Page 28

INITIAL SETUP

Before you begin enjoying your new receiver, a few adjustments should be made to configure the AVR 154 to match your actual system.

Make sure that you have connected a video display to either the S-video or composite video monitor output on the receiver. When you turn on your display and the AVR, you should see a blue screen. A message may appear briefly at the bottom of the screen. This message is part of the on-screen display system, and is referred to as the “semi-OSD”. The semi-OSD is activated any time you send a command to the AVR, and any time the AVR detects a change in the incoming signal. Semi-OSD messages are overlaid on top of any video signal, so that you may continue to watch your program while making adjustments to the AVR.

Although it’s possible to configure the AVR using only the remote and the semi-OSD messages, we recommend that you use the full-screen menu system, known as the “full-OSD”.

Using the On-Screen Menu System

The full-OSD system is accessed by pressing the OSD Button on the remote. See Figure 40. While the full-OSD system is in use, it isn’t possible to see any video programming. In addition, an OSD ON message will appear on the front panel of the receiver to remind you to use a video display.

Figure 40 – Navigation Buttons

Press the OSD Button to display the Master Menu. Use the /¤ Buttons to point the cursor to different lines in the menu. Press the OK Button to select one of the submenus listed in the Master Menu, or to return to a previous menu. Within the submenus, after positioning the cursor at a particular line item, use the / Buttons to change a setting. When the desired setting appears, use the /¤ Buttons to navigate to another line item. Except for the TITLE setting in the INPUT SETUP menu, there is no need to press the OK Button after your desired setting appears.

The Master Menu allows access to four submenus: Input Setup, Surround Select, Manual Setup and System Setup. See Figure 41.

NOTE: Your menu’s appearance may vary, but the functions remain the same.

Figure 41 – Master Menu Screen

If you are an experienced home theater user, you may prefer to use the menus in this order:

1.System Setup (described in Advanced Functions section)

2.Manual Setup (described here and in Advanced Functions)

3.Input Setup (described in this section)

4.Surround Select (see Advanced Functions section)

We recommend that most users follow the instructions in this INITIAL SETUP section to configure a basic home theater system. You may return to these menus at any time to make additional adjustments. Record your configuration settings in the appropriate places in Tables A2 through A8 in the Appendix, in case you need to reenter them after a system reset, or if the AVR’s Master Power Switch is turned off or the unit is unplugged for more than four weeks.

This section requires that you complete all of the steps in the Installation section that apply to your receiver. You should have connected all of your loudspeakers and a video display, as well as your source devices. You should be able to turn on the receiver and view a blue screen on your video display. If necessary, reread the Installation Section before continuing.

Step One – Determine Speaker Size

The AVR 154 can’t detect how many speakers you’ve connected to it; nor can it determine their capabilities. For this part of the system setup, consult the owner’s guide for each of your speakers. If you don’t have the guide, obtain the speaker’s technical specifications from the manufacturer’s Web site, or by contacting the manufacturer directly.

This information is needed to program the receiver’s bass management, which determines which speakers the receiver will use to play back the low-frequency (bass) portion of the source program.

If the lowest notes are played by small satellite speakers, they won’t sound their best, and they may damage the speaker by going beyond its capabilities. If the highest notes are played by the special-purpose subwoofer, they may not be heard at all.

28

Image 28
Contents AVR Safety Information Important Safety InstructionsImportant Safety Information Staple Invoice Here Table of Contents Introduction Thank you for choosing Harman KardonHarman Kardon AVR 154 5.1-Channel Audio/Video Receiver Audio SectionSupplied Accessories Audio InputsAudio/Video Inputs With S-Video Digital Audio InputsPower Indicator This LED has four possible modes FRONT-PANEL ControlsMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V Remote Control Functions Video 3 Controls televisions and other video displaysAUX Controls a device connected to the Auxiliary Input Channel Input Selector Press this button to selectPower On AVR SelectorRemote Control Functions Introduction to Home Theater Surround ModesTypical Home Theater System Multichannel AudioConnecting Source Devices to the AVR ConnectionsSpeaker Connections SubwooferAudio Connections Digital AudioAnalog Audio Video ConnectionsFM antenna uses a 75-ohm F-connector. See Figure AntennasAnalog Video Is colored red. See FigureSpeaker Placement Installation Step One Connect the SpeakersStep Two Connect the Subwoofer Step Three Connect the AntennasComponent video Connect a DVD, SACD, HD-DVD or Blu-ray Disc PlayerConnecting a Component-Video-Equipped Disc Player Connect an Audio/Video Recorder PVR, DVR or TiVoConnecting a Video Recorder Connecting a Game Console, Camera or Other Device Connect a CD Player or Any Audio-Only DeviceConnect a Tape Deck or Any Audio-Only Recorder Connect a Portable Audio PlayerStep Five Connect the Video Display Step Six Plug in AC PowerStep Seven Insert Batteries in Remote Turn on your source device Enter a code from number 1 aboveFor instructions on these advanced programming functions Step Nine Turn On the AVRTwo steps are required the first time you turn on the AVR Using the On-Screen Menu System Initial SetupStep One Determine Speaker Size Step Two Measure Speaker Distances Step Three Manual Setup MenuSpeaker Size Menu Speaker/Channel Input Indicators Speaker Crossover MenuDelay Adjust Menu Step Four Output Level CalibrationMethod A. Using the Remote Control With the Test Tone Method C. Using the Full-OSD MenuStep Five Configure Sources You are now ready to begin enjoying your new receiverOperation Headphones Source SelectionAudio Input Selection Video Input SelectionChannel Direct Inputs Using the TunerWe recommend that you connect this player as follows Recording AUX InputSelecting a Surround Mode Select a Surround Mode RemoteAnalog Audio Signals Digital Audio SignalsAdvanced Functions Audio Processing and Surround SoundDolby Surround Settings System Settings Default ModesMode Group Panorama adjusts wraparound surround effectMode Group Enveloping sound field is desired 0 orSurround Mode Description Incoming Bitstream or Signal DTS StereoAdvanced Remote Control Functions Dim FunctionPunch-Through Programming To dim the displayProcessor Reset Resetting the RemoteMemory To program, or record a macro, follow these stepsTroubleshooting Guide Appendix VCR, DVR, PVRAppendix Default settings, worksheets, remote product codes Table A2 Source Input Setting DefaultsTable A3 Speaker/Channel Setting Defaults Table A4 Delay Setting DefaultsTable A5 Source Input Settings Table A6 Speaker/Channel SettingsTable A7 Remote Control Codes Table A8 System SettingsTable A9 Remote Control Function List TV VID3PPV Aiwa Table A10 Table A11Table A12 Remote Control Product Codes CD Table A13 Remote Control Product Codes DVDTable A15 Remote Control Product Codes Tape Table A16 Remote Control Product Codes CBLTable A16 AVR 154 Technical Specifications DTS
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.