Harman-Kardon Guide to Connecting Your Audio and Video Devices with the AVR 154
Page 23

•Connect the recorder’s optical digital audio output to the Optical 2 Input on the AVR (if available).

•Then go to “Composite/S-Video” below to make recordings, as the AVR 154 cannot make recordings from copy-protected component video sources or digital audio (except 2-channel) sources.

AVR 154

Figure 24 – Connecting a Component-Video-Equipped Recorder

Composite/S-Video:If the best video connection common to both the recorder and the TV is either S-video or composite video, or to make recordings, follow these steps, using only one type of video connection throughout (see Figure 25):

•Connect the recorder’s S-video/composite video output to the Video 1 S-Video/Composite Video Input on the AVR.

•Connect the recorder’s S-video/composite video input to the Video 1 S-Video/Composite Video Output on the AVR.

•Connect the recorder’s analog audio outputs to the Video 1 Audio Inputs on the AVR.

•Connect the recorder’s analog audio inputs to the Video 1 Audio Outputs on the AVR.

AVR 154

Figure 25 – Connecting a Video Recorder

NOTE: If S-video or composite video is the only video connec- tion, you may also use any available digital audio connection.

INSTALLATION

Connect a Cable TV, Satellite, HDTV or Other Set-Top Box for Broadcast Television

NOTE: If you receive your television programming using your TV with an antenna or direct cable connection, connect the TV’s analog audio outputs to the Video 3 Analog Audio Inputs. If the TV has a digital audio output, connect it to one of the front- panel digital audio inputs. Do not connect any video output on the television set to any video input on the receiver. See Step Five for information on connecting the receiver’s video monitor outputs to the television.

HDMI Video: If the set-top box and the TV both have an HDMI connector, connect the set-top box as follows (see Figure 26):

•Connect the set-top’s HDMI output to the HDMI 3 Input on the AVR.

•Connect the set-top’s optical digital audio output to the Optical 1 Input on the AVR (if available).

AVR 154

Figure 26 – Connecting an HDMI-Equipped Set-Top Box

Component Video: If the set-top box or the TV does not have an HDMI connector, but they both have component video connectors, connect the set-top box as follows (see Figure 27):

•Connect the set-top’s component video output to the Component Video 2 Input on the AVR (if available).

•Connect the set-top’s optical digital audio output to the Optical 1 Input on the AVR (if available).

AVR 154

Figure 27 – Connecting a Component-Video-Equipped Set-Top Box

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents AVR Important Safety Instructions Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Audio Section IntroductionThank you for choosing Harman Kardon Harman Kardon AVR 154 5.1-Channel Audio/Video ReceiverDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video Inputs With S-VideoFRONT-PANEL Controls Power Indicator This LED has four possible modesMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V Channel Input Selector Press this button to select Remote Control FunctionsVideo 3 Controls televisions and other video displays AUX Controls a device connected to the Auxiliary InputAVR Selector Power OnRemote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemSubwoofer Connecting Source Devices to the AVRConnections Speaker ConnectionsVideo Connections Audio ConnectionsDigital Audio Analog AudioIs colored red. See Figure FM antenna uses a 75-ohm F-connector. See FigureAntennas Analog VideoSpeaker Placement Step Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferConnect a DVD, SACD, HD-DVD or Blu-ray Disc Player Component videoConnect an Audio/Video Recorder PVR, DVR or TiVo Connecting a Component-Video-Equipped Disc PlayerConnecting a Video Recorder Connect a Portable Audio Player Connecting a Game Console, Camera or Other DeviceConnect a CD Player or Any Audio-Only Device Connect a Tape Deck or Any Audio-Only RecorderStep Seven Insert Batteries in Remote Step Six Plug in AC PowerStep Five Connect the Video Display Enter a code from number 1 above Turn on your source deviceTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRFor instructions on these advanced programming functions Step One Determine Speaker Size Initial SetupUsing the On-Screen Menu System Speaker Size Menu Step Three Manual Setup MenuStep Two Measure Speaker Distances Speaker Crossover Menu Speaker/Channel Input IndicatorsStep Four Output Level Calibration Delay Adjust MenuMethod C. Using the Full-OSD Menu Method A. Using the Remote Control With the Test ToneYou are now ready to begin enjoying your new receiver Step Five Configure SourcesOperation Video Input Selection HeadphonesSource Selection Audio Input SelectionWe recommend that you connect this player as follows Using the TunerChannel Direct Inputs AUX Input RecordingSelect a Surround Mode Remote Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsDolby Surround Settings Default Modes System Settings0 or Mode GroupPanorama adjusts wraparound surround effect Mode Group Enveloping sound field is desiredDTS Stereo Surround Mode Description Incoming Bitstream or SignalTo dim the display Advanced Remote Control FunctionsDim Function Punch-Through ProgrammingTo program, or record a macro, follow these steps Processor ResetResetting the Remote MemoryTroubleshooting Guide VCR, DVR, PVR AppendixTable A4 Delay Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Source Input Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A6 Speaker/Channel Settings Table A5 Source Input SettingsTable A8 System Settings Table A7 Remote Control CodesTV VID3 Table A9 Remote Control Function ListPPV Aiwa Table A11 Table A10Table A13 Remote Control Product Codes DVD Table A12 Remote Control Product Codes CDTable A16 Remote Control Product Codes CBL Table A15 Remote Control Product Codes TapeTable A16 DTS AVR 154 Technical Specifications
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.
Top Page Image Contents