Harman-Kardon AVR 154 owner manual Important Safety Information

Page 3

SAFETY INFORMATION

Important Safety Information

Verify Line Voltage Before Use

Your AVR 154 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.

If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your selling dealer before plugging the unit into a wall outlet.

unit’s feet may leave marks on certain wood or veneer materials. Use caution when placing the unit on soft woods or other materials that may be damaged by heat or heavy objects. Some surface finishes may be particularly sensitive to absorbing such marks, due to a variety of factors beyond Harman Kardon's control, including the nature of the finish, cleaning materials used, and normal heat and vibration caused by the use of the product, or other factors. We recommend that caution be exercised in choosing an installation location for the component and in normal maintenance practices, as your warranty will not cover this type of damage

to furniture.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized service center with a cord meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug; never pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or staple acciden- tally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service center.

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide some protection against voltage surges and static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conduc- tors, location of antenna discharge unit, connection to grounding electrodes and requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (cable TV) system installer’s attention to article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Installation Location

•To ensure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

•Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. Under some circumstances, a fan may be required.

•Do not place the unit directly on a carpeted surface.

•Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment.

•Avoid moist or humid locations.

•Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

•Due to the weight of the AVR 154 and the heat generated by the amplifiers, there is the remote possibility that the rubber padding on the bottom of the

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only after unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet.

Important Information for the User

This equipment has been tested and found to comply with the limits for a Class-B digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation.

NOTE: Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user’s authority to operate the equipment.

Unpacking

The carton and shipping materials used to protect your new receiver during shipment were specially designed to cushion it from shock and vibration. We suggest that you save the carton and packing materials for use in shipping if you move, or should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully slitting the tape seams on the bottom and collapsing the carton. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and other sections of the shipping protection are recyclable. Please respect the environment and discard those materials at a local recycling center.

It is important that you remove the protective plastic film from the front-panel lens. Leaving the film in place will affect the performance of your remote control.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents AVR Important Safety Instructions Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Audio Section IntroductionThank you for choosing Harman Kardon Harman Kardon AVR 154 5.1-Channel Audio/Video ReceiverDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video Inputs With S-VideoFRONT-PANEL Controls Power Indicator This LED has four possible modesMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V Channel Input Selector Press this button to select Remote Control FunctionsVideo 3 Controls televisions and other video displays AUX Controls a device connected to the Auxiliary InputAVR Selector Power OnRemote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemSubwoofer Connecting Source Devices to the AVRConnections Speaker ConnectionsVideo Connections Audio ConnectionsDigital Audio Analog AudioIs colored red. See Figure FM antenna uses a 75-ohm F-connector. See FigureAntennas Analog VideoSpeaker Placement Step Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferConnect a DVD, SACD, HD-DVD or Blu-ray Disc Player Component videoConnect an Audio/Video Recorder PVR, DVR or TiVo Connecting a Component-Video-Equipped Disc PlayerConnecting a Video Recorder Connect a Portable Audio Player Connecting a Game Console, Camera or Other DeviceConnect a CD Player or Any Audio-Only Device Connect a Tape Deck or Any Audio-Only RecorderStep Six Plug in AC Power Step Five Connect the Video DisplayStep Seven Insert Batteries in Remote Enter a code from number 1 above Turn on your source deviceStep Nine Turn On the AVR For instructions on these advanced programming functionsTwo steps are required the first time you turn on the AVR Initial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Speaker Crossover Menu Speaker/Channel Input IndicatorsStep Four Output Level Calibration Delay Adjust MenuMethod C. Using the Full-OSD Menu Method A. Using the Remote Control With the Test ToneYou are now ready to begin enjoying your new receiver Step Five Configure SourcesOperation Video Input Selection HeadphonesSource Selection Audio Input SelectionUsing the Tuner Channel Direct InputsWe recommend that you connect this player as follows AUX Input RecordingSelect a Surround Mode Remote Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsDolby Surround Settings Default Modes System Settings0 or Mode GroupPanorama adjusts wraparound surround effect Mode Group Enveloping sound field is desiredDTS Stereo Surround Mode Description Incoming Bitstream or SignalTo dim the display Advanced Remote Control FunctionsDim Function Punch-Through ProgrammingTo program, or record a macro, follow these steps Processor ResetResetting the Remote MemoryTroubleshooting Guide VCR, DVR, PVR AppendixTable A4 Delay Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Source Input Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A6 Speaker/Channel Settings Table A5 Source Input SettingsTable A8 System Settings Table A7 Remote Control CodesTV VID3 Table A9 Remote Control Function ListPPV Aiwa Table A11 Table A10Table A13 Remote Control Product Codes DVD Table A12 Remote Control Product Codes CDTable A16 Remote Control Product Codes CBL Table A15 Remote Control Product Codes TapeTable A16 DTS AVR 154 Technical Specifications
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.
Top Page Image Contents