Harman-Kardon AVR 154 owner manual Step Nine Turn On the AVR

Page 27

INSTALLATION

the Remote Control Function List, Table A9 in the Appendix, for each button’s functions with the various product types.

You may program Macros, which are preprogrammed code sequences that execute many code commands with a single button press. You may also program “punch-through” codes, which allow the remote to operate the volume, channel or transport controls of another device without having to switch the remote’s device mode. See pages 44 through

45 for instructions on these advanced programming functions.

NOTE: The AVR 154 remote is preprogrammed to operate the transport controls of Harman Kardon DVD players when the AVR or the Video 2 (cable/satellite) or Video 3 (TV) source is selected. You may change this punch-through programming at any time.

Step Nine – Turn On the AVR 154

Two steps are required the first time you turn on the AVR 154.

1.Gently press the Master Power Switch until the word OFF is no longer visible. The Power Indicator above the two power switches should light up in amber, indicating that the AVR is in Standby mode and is ready to be turned on. See Figure 38. Normally, you may leave the Master Power Switch in the ON position, even when the receiver is not being used.

Figure 38 – Power Switches

2.There are several ways in which the AVR 154 may be turned on from Standby mode.

a)Press the Standby/On Switch on the front panel. See Figure 38.

b)Press the Source Select Button on the front panel. See Figure 39.

Figure 39 – Source Select Button

c)Using the remote, press any one of these buttons: AVR, DVD, CD, TAPE, AUX, HDMI 1, HDMI 2, HDMI 3, VID1, VID2, VID3, AM/FM or 6CH. See page 13.

NOTE: Any time you press one of the Input Selectors, the remote will switch to the corresponding device mode and will only operate that device. To control the receiver, press the AVR Button to return the remote to AVR mode.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents AVR Important Safety Instructions Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Audio Section IntroductionThank you for choosing Harman Kardon Harman Kardon AVR 154 5.1-Channel Audio/Video ReceiverDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video Inputs With S-VideoFRONT-PANEL Controls Power Indicator This LED has four possible modesMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V Channel Input Selector Press this button to select Remote Control FunctionsVideo 3 Controls televisions and other video displays AUX Controls a device connected to the Auxiliary InputAVR Selector Power OnRemote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemSubwoofer Connecting Source Devices to the AVRConnections Speaker ConnectionsVideo Connections Audio ConnectionsDigital Audio Analog AudioIs colored red. See Figure FM antenna uses a 75-ohm F-connector. See FigureAntennas Analog VideoSpeaker Placement Step Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferConnect a DVD, SACD, HD-DVD or Blu-ray Disc Player Component videoConnect an Audio/Video Recorder PVR, DVR or TiVo Connecting a Component-Video-Equipped Disc PlayerConnecting a Video Recorder Connect a Portable Audio Player Connecting a Game Console, Camera or Other DeviceConnect a CD Player or Any Audio-Only Device Connect a Tape Deck or Any Audio-Only RecorderStep Six Plug in AC Power Step Five Connect the Video DisplayStep Seven Insert Batteries in Remote Enter a code from number 1 above Turn on your source deviceStep Nine Turn On the AVR For instructions on these advanced programming functionsTwo steps are required the first time you turn on the AVR Initial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Speaker Crossover Menu Speaker/Channel Input IndicatorsStep Four Output Level Calibration Delay Adjust MenuMethod C. Using the Full-OSD Menu Method A. Using the Remote Control With the Test ToneYou are now ready to begin enjoying your new receiver Step Five Configure SourcesOperation Video Input Selection HeadphonesSource Selection Audio Input SelectionUsing the Tuner Channel Direct InputsWe recommend that you connect this player as follows AUX Input RecordingSelect a Surround Mode Remote Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsDolby Surround Settings Default Modes System Settings0 or Mode GroupPanorama adjusts wraparound surround effect Mode Group Enveloping sound field is desiredDTS Stereo Surround Mode Description Incoming Bitstream or SignalTo dim the display Advanced Remote Control FunctionsDim Function Punch-Through ProgrammingTo program, or record a macro, follow these steps Processor ResetResetting the Remote MemoryTroubleshooting Guide VCR, DVR, PVR AppendixTable A4 Delay Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Source Input Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A6 Speaker/Channel Settings Table A5 Source Input SettingsTable A8 System Settings Table A7 Remote Control CodesTV VID3 Table A9 Remote Control Function ListPPV Aiwa Table A11 Table A10Table A13 Remote Control Product Codes DVD Table A12 Remote Control Product Codes CDTable A16 Remote Control Product Codes CBL Table A15 Remote Control Product Codes TapeTable A16 DTS AVR 154 Technical Specifications
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.
Top Page Image Contents