Harman-Kardon AVR 154 owner manual Operation

Page 34

OPERATION

Now that you have installed your system components and completed at least a basic configuration of your receiver, you are ready to begin enjoying your home theater system.

Turning On the AVR 154

Gently press the Master Power Switch until the word OFF is no longer visible. The Power Indicator above the two power switches should light up in amber. This indicates that the AVR is in Standby mode and is ready to be turned on. Normally, you may leave the Master Power Switch in the ON position, even when the receiver is not being used. See Figure 38.

There are several ways in which the AVR 154 may be turned on:

a)Press the Standby/On Switch on the front panel. See Figure 38.

b)Press the Source Select Button on the front panel. See Figure 39.

c)Using the remote, press any one of these buttons: AVR, DVD, CD, TAPE, AUX, HDMI 1, HDMI 2, HDMI 3, VID1, VID2, VID3, AM/FM or 6CH. See page 13.

NOTE: Any time you press one of the remote’s Input Selectors, the remote will switch modes so that it will only operate that device. To control the receiver, press the AVR Button to return the remote to AVR mode.

To turn the receiver off, press either the Standby/On Switch on the

front panel, or press the AVR Button and the OFF Button on the remote. Unless the receiver will not be used for an extended period of time (for example, if you will be on vacation), it is not necessary to turn off the Master Power Switch. When the Master Power Switch is turned off, any settings you have programmed, including system configuration and preset radio stations, will be preserved for up to four weeks.

Sleep Timer

You may program the AVR to play for up to 90 minutes and then turn off automatically using the sleep timer.

Press the Sleep Button on the remote, and the time until turn-off will be displayed. See Figure 51. Each additional press of the Sleep Button will reduce the time until turn-off by 10 minutes, until the OFF setting is reached, which disables the sleep timer.

If you press the Sleep Button after the timer has been set, the remaining time until turn-off will be displayed. You may press the Sleep Button to change the time until turn-off. Press and hold the Sleep Button to turn the sleep timer off.

Volume Control

The volume may be adjusted either by turning the knob on the front panel (clockwise to increase volume or counterclockwise to decrease volume), or by pressing the Volume Control Buttons on the remote. See Figure 52. The volume is displayed as a negative number of decibels (dB) below the 0dB reference point.

Unlike the volume controls on some other products, 0dB is the maximum volume for the AVR 154. Although it’s physically possible to turn the volume to a higher level, doing so may damage your hearing and your speakers. For certain more dynamic audio materials, even 0dB may be too high, allowing for damage to equipment.

Figure 52 – Volume Controls

The AVR 154 is designed to reproduce audio with a minimum amount of distortion, which may lead you to think that your hearing and the equipment can handle higher volumes. We urge caution with regard to volume levels.

Mute Function

To temporarily mute all speakers and the headphones, press the Mute Button on the remote. See Figure 53. Any recording in progress will not be affected. The MUTE message will flash in the display as a reminder. To restore normal audio, either press the Mute Button again, or adjust the volume. Turning off the AVR will also end muting.

Figure 51 – Sleep Button

When the sleep timer has been set, the front-panel display will automati- cally dim to half-brightness. If you press any button on the remote or front panel, the display will return to full-brightness. The display will dim again several seconds after your last command.

Figure 53 – Mute Button

Tone Controls

You may boost or cut either the treble or the bass frequencies by up to 10dB.

Press the Tone Mode Button once. See Figure 54. This will indicate whether the tone controls are in or out of the circuitry. With the TONE IN message displayed, press the Tone Mode Button repeatedly to access TREBLE MODE and BASS MODE. Use the ⁄/¤ Buttons to change the treble or bass settings, as desired.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents AVR Safety Information Important Safety InstructionsImportant Safety Information Staple Invoice Here Table of Contents Harman Kardon AVR 154 5.1-Channel Audio/Video Receiver IntroductionThank you for choosing Harman Kardon Audio SectionAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsPower Indicator This LED has four possible modes FRONT-PANEL ControlsMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V AUX Controls a device connected to the Auxiliary Input Remote Control FunctionsVideo 3 Controls televisions and other video displays Channel Input Selector Press this button to selectPower On AVR SelectorRemote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioSpeaker Connections Connecting Source Devices to the AVRConnections SubwooferAnalog Audio Audio ConnectionsDigital Audio Video ConnectionsAnalog Video FM antenna uses a 75-ohm F-connector. See FigureAntennas Is colored red. See FigureSpeaker Placement Step Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasComponent video Connect a DVD, SACD, HD-DVD or Blu-ray Disc PlayerConnecting a Component-Video-Equipped Disc Player Connect an Audio/Video Recorder PVR, DVR or TiVoConnecting a Video Recorder Connect a Tape Deck or Any Audio-Only Recorder Connecting a Game Console, Camera or Other DeviceConnect a CD Player or Any Audio-Only Device Connect a Portable Audio PlayerStep Five Connect the Video Display Step Six Plug in AC PowerStep Seven Insert Batteries in Remote Turn on your source device Enter a code from number 1 aboveFor instructions on these advanced programming functions Step Nine Turn On the AVRTwo steps are required the first time you turn on the AVR Using the On-Screen Menu System Initial SetupStep One Determine Speaker Size Step Two Measure Speaker Distances Step Three Manual Setup MenuSpeaker Size Menu Speaker/Channel Input Indicators Speaker Crossover MenuDelay Adjust Menu Step Four Output Level CalibrationMethod A. Using the Remote Control With the Test Tone Method C. Using the Full-OSD MenuStep Five Configure Sources You are now ready to begin enjoying your new receiverOperation Audio Input Selection HeadphonesSource Selection Video Input SelectionChannel Direct Inputs Using the TunerWe recommend that you connect this player as follows Recording AUX InputSelecting a Surround Mode Select a Surround Mode RemoteAdvanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundDolby Surround Settings System Settings Default ModesMode Group Enveloping sound field is desired Mode GroupPanorama adjusts wraparound surround effect 0 orSurround Mode Description Incoming Bitstream or Signal DTS StereoPunch-Through Programming Advanced Remote Control FunctionsDim Function To dim the displayMemory Processor ResetResetting the Remote To program, or record a macro, follow these stepsTroubleshooting Guide Appendix VCR, DVR, PVRTable A3 Speaker/Channel Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Source Input Setting Defaults Table A4 Delay Setting DefaultsTable A5 Source Input Settings Table A6 Speaker/Channel SettingsTable A7 Remote Control Codes Table A8 System SettingsTable A9 Remote Control Function List TV VID3PPV Aiwa Table A10 Table A11Table A12 Remote Control Product Codes CD Table A13 Remote Control Product Codes DVDTable A15 Remote Control Product Codes Tape Table A16 Remote Control Product Codes CBLTable A16 AVR 154 Technical Specifications DTS
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.
Top Page Image Contents