Harman-Kardon AVR 154 0 or, Dolby Digital EX played as, Passages to avoid disturbing others, Game

Page 42

ADVANCED FUNCTIONS

Table 2 – Surround Modes

Surround Mode

Description

Incoming Bitstream or Signal

 

 

 

Dolby Digital

Provides up to five separate main audio channels and a dedicated

• Dolby Digital 1/0/.0 or .1, 2/0/.0 or .1,

 

low-frequency effects (LFE) channel. May be encoded for Night mode,

3/0/.0 or .1, 2/1/.0 or .1, 2/2/.0 or .1,

 

which allows the user to apply a compression setting that maintains

3/2/.0 or .1

 

intelligibility of softer passages while reducing the loudness of dynamic

• Dolby Digital EX (played as 5.1)

 

passages to avoid disturbing others.

 

 

 

 

Dolby Digital Stereo

Delivers a 2-channel downmix of Dolby Digital materials.

• Dolby Digital 1/0/.0 or .1, 2/0/.0 or .1,

Mode Group

 

3/0/.0 or .1, 2/1/.0 or .1, 2/2/.0 or .1,

 

 

3/2/.0 or .1

 

 

• Dolby Digital EX

 

 

 

Dolby Pro Logic II

Analog decoder that derives five full-range, discrete main audio channels

See below.

 

from matrix surround-encoded or 2-channel analog sources. Four

 

 

variants are available.

 

 

 

 

Dolby Pro Logic II

Variant of Dolby Pro Logic II that is optimized for movie and

• Dolby Digital 2.0 or 2.1

Movie

television programs.

• Analog (2-channel)

 

 

• Tuner

 

 

• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

 

 

 

Dolby Pro Logic II

Variant of Dolby Pro Logic II that is optimized for music selections.

• Dolby Digital 2.0 or 2.1

Music

Allows adjustment of sound field presentation in three dimensions:

• Analog (2-channel)

 

• Center Width (adjusts width of vocal soundstage)

• Tuner

 

• Dimension (adjusts depth of soundstage)

• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

 

• Panorama (adjusts wraparound surround effect)

 

 

 

 

Dolby Pro Logic II

Variant of Dolby Pro Logic II that emphasizes use of the surround

• Dolby Digital 2.0 or 2.1

Game

channels and subwoofer for total immersion in the video gaming

• Analog (2-channel)

 

experience.

• Tuner

 

 

• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

 

 

 

Dolby Pro Logic

Original version of Dolby Pro Logic that steered a mono signal

• Dolby Digital 2.0 or 2.1

 

containing information below 7kHz to the surround channels.

• Analog (2-channel)

 

 

• Tuner

 

 

• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

 

 

 

Dolby Virtual Speaker

Simulates 5.1 channels when fewer speakers are present, or a more

See below.

Mode Group

enveloping sound field is desired.

 

 

 

 

Dolby Virtual Speaker

When fewer than five main speakers are present, the Reference

• Dolby Digital (uses only two-speaker mode

Reference

mode virtualizes the missing speakers with accurate localization.

when signal does not contain center channel

 

Select from two- or three-speaker mode, depending on how many

information)

 

physical speakers are in your system.

• Analog (2-channel)

 

 

• Tuner

 

 

• PCM (32kHz, 44.1kHz or 48kHz)

 

 

 

Dolby Virtual Speaker

Wide mode may be used with two, three, four or five main speakers to widen

• Dolby Digital (number of channels available

Wide

the front soundstage by virtualizing the locations of the left and right speakers.

varies by number of channels in signal)

 

 

• Analog (2-channel)

 

 

• Tuner

 

 

• PCM (32kHz, 44.1kHz or 48kHz)

 

 

 

DTS Digital Surround

Using a different encoding/decoding method than Dolby Digital,

• DTS 1/0/.0 or .1, 2/0/.0 or .1, 3/0/.0 or .1,

 

it also provides up to five discrete main channels, plus an LFE channel.

3/1/.0 or .1, 2/2/.0 or .1, 3/2/.0 or .1

 

 

DTS-ES Matrix (played as 5.1)

 

 

DTS-ES Discrete (played as 5.1)

 

 

 

42

Image 42
Contents AVR Safety Information Important Safety InstructionsImportant Safety Information Staple Invoice Here Table of Contents Harman Kardon AVR 154 5.1-Channel Audio/Video Receiver IntroductionThank you for choosing Harman Kardon Audio SectionAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsPower Indicator This LED has four possible modes FRONT-PANEL ControlsMessage Display Speaker/Channel Remote IR Sensor REAR-PANEL Connections DVD A/V AUX Controls a device connected to the Auxiliary Input Remote Control FunctionsVideo 3 Controls televisions and other video displays Channel Input Selector Press this button to selectPower On AVR SelectorRemote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioSpeaker Connections Connecting Source Devices to the AVRConnections SubwooferAnalog Audio Audio ConnectionsDigital Audio Video ConnectionsAnalog Video FM antenna uses a 75-ohm F-connector. See FigureAntennas Is colored red. See FigureSpeaker Placement Step Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasComponent video Connect a DVD, SACD, HD-DVD or Blu-ray Disc PlayerConnecting a Component-Video-Equipped Disc Player Connect an Audio/Video Recorder PVR, DVR or TiVoConnecting a Video Recorder Connect a Tape Deck or Any Audio-Only Recorder Connecting a Game Console, Camera or Other DeviceConnect a CD Player or Any Audio-Only Device Connect a Portable Audio PlayerStep Six Plug in AC Power Step Five Connect the Video DisplayStep Seven Insert Batteries in Remote Turn on your source device Enter a code from number 1 aboveStep Nine Turn On the AVR For instructions on these advanced programming functionsTwo steps are required the first time you turn on the AVR Initial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Speaker/Channel Input Indicators Speaker Crossover MenuDelay Adjust Menu Step Four Output Level CalibrationMethod A. Using the Remote Control With the Test Tone Method C. Using the Full-OSD MenuStep Five Configure Sources You are now ready to begin enjoying your new receiverOperation Audio Input Selection HeadphonesSource Selection Video Input SelectionUsing the Tuner Channel Direct InputsWe recommend that you connect this player as follows Recording AUX InputSelecting a Surround Mode Select a Surround Mode RemoteAdvanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundDolby Surround Settings System Settings Default ModesMode Group Enveloping sound field is desired Mode GroupPanorama adjusts wraparound surround effect 0 orSurround Mode Description Incoming Bitstream or Signal DTS StereoPunch-Through Programming Advanced Remote Control FunctionsDim Function To dim the displayMemory Processor ResetResetting the Remote To program, or record a macro, follow these stepsTroubleshooting Guide Appendix VCR, DVR, PVRTable A3 Speaker/Channel Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Source Input Setting Defaults Table A4 Delay Setting DefaultsTable A5 Source Input Settings Table A6 Speaker/Channel SettingsTable A7 Remote Control Codes Table A8 System SettingsTable A9 Remote Control Function List TV VID3PPV Aiwa Table A10 Table A11Table A12 Remote Control Product Codes CD Table A13 Remote Control Product Codes DVDTable A15 Remote Control Product Codes Tape Table A16 Remote Control Product Codes CBLTable A16 AVR 154 Technical Specifications DTS
Related manuals
Manual 2 pages 34.26 Kb

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.