11.Disconnect white power cord conductor (D) from motor control board (24).
Motor Control Board
16.Disconnect three motor connectors from motor con- trol board to motor.
24
ti15851a
D
12.Disconnect black power lead (J) on motor control board (24) from ON/OFF switch.
J
ti15849a
13.Remove ground screw (58) from motor control board/heat sink assembly.
58
ti15846a
14. Remove two top screws (61) and control box (3).
61
3
ti15912a
15.Disconnect transducer connector from motor control board (24).
ti12999a
24
ti15847a
17.Remove two screws (83) holding motor control board /heat sink assembly to power module frame. Remove motor control board/heat sink assembly.
83
ti15845a
18.Remove six outer screws, two inner screws, and remove control board (24) from heat sink.
24
ti15844a
3A0246C | 13 |