Digital Display
Digital Display
Removal
1.Turn off unit. Wait 5 minutes before servicing.
2.Remove four screws (33b) and remove display cover (33k).
33k
ti15786a
33b
3.Unplug display board connector from motor control board (24).
24
ti13569a
A
Installation
1.Plug display board connector (A) into motor control board (24).
ti13569a24
A
2.Replace display cover (33k) and torque four screws (33b) to
33k
ti15786a
33b
NOTE: Make sure noise shield tabs are routed to the inside of the control box when assembling.
26 | 3A0246C |