4.Attach bearing housing (9) to gear housing (5a) (slowly turn motor fan by hand to align gear into pump connecting rod). Torque four bearing housing screws (19) to
5a
9
ti15630a
19
5.Replace motor/pump assembly into pump module. Replace and torque two screws (5b) underneath motor base plate to 200 - 220
5b
ti11734a
6.Reconnect three wire harnesses (see Wiring Diagrams, pages 34-36).
Motor
7.Replace motor shroud (98) and torque four screws (40) to 30 - 34
40
98
ti15624a
8. Reconnect material hose (79) to pump (18a).
79
18a
ti15616a
9. Replace Power Module, see page 7.
3A0246C | 11 |