12. Remove top two screws (61) and control box (3).
61
3
ti15912a
13.Disconnect transducer connector from motor control board (24).
ti12999a
24
14.Disconnect three motor connectors from motor con- trol board to motor.
ti15847a
Motor Control Board
15.Remove two screws (83) holding motor control board / heat sink assembly to power module frame. Remove motor control board/heat sink assembly.
83
ti15845a
16.Remove six outer screws, two inner screws, and remove control board (24) from heat sink.
24
ti15844a
3A0246C | 15 |