Hitachi 236464 manual Dura-Flot600 Pumps, Instructions Parts List

Page 1

Instructions – Parts List

Parts

STAINLESS STEEL

Dura–Flot600 Pumps

With Severe–Duty Rod and Cylinder

Read warnings and instructions.

See page 2 for model numbers and maximum working pressures.

* See page 2 for models that are

certified and

approved.

Model 686615

04498

Model 236464

308350F

04373

Model 237634

GRACO INC.P.O. BOX 1441MINNEAPOLIS, MN55440-1441 Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001

Image 1

Contents

Dura-Flot600 Pumps Instructions Parts ListList of Models Table of ContentsEquipment Misuse Hazard SymbolsMoving Parts Hazard Injection HazardToxic Fluid Hazard Fire and Explosion Hazard308350 System Accessories InstallationGeneral Information Grounding Object being sprayed follow your local codeAir Line Accessories KEY Typical InstallationPressure Relief Procedure Operation/MaintenancePacking Nut/Wet-Cup 110Flush the Pump Before First Use Starting and Adjusting the PumpFlushing Shutdown and Care of the PumpIts stroke keep the wet-cup 1/3 filled with a Troubleshooting ChartCompatible solvent Disconnecting the Displacement Pump ServiceReconnecting the Displacement Pump Required Tools107 106 110 109 101 105 108Disassembly Displacement Pump ServiceTorque to 258-285 NSm 190-210 ft-lb Reassembly 10 Ref 11 Ref Housing 7 onto the cylinder handtight. Install the seal 11* on the bottomSealing surface of the intake housing Using a pipe wrench, torque the intake housing101 105 108 109 102Y 107 106 110 Parts102Y 107 106 110 101 105 108 109 Part No Pump, Series a 251 Ratio, with Senator Air Motor102Y 107 110 106 112 113Piston Packing Stack See Throat Packing Stack seeTeflonr Packing Kit 237236 Optional Packing KitsUHMWPE/Leather Packing Kit 237238 Optional UHMWPE/PTFErPacking Kit 237609 OptionalTested in accordance with ISO Technical DataLiters/min 11.4 Mounting Hole Layout DimensionsGraco Information Graco Standard Warranty