Hitachi 236464 manual Ref 11 Ref

Page 19

Service

1 Torque to 61–75 NSm (45–55 ft-lb).

6 Lips face up.

2Torque to 325–353 NSm (240–260 ft-lb).

7 Lips face down.

1

3Torque to 258–285 NSm (190–210 ft-lb).

4Lubricate.

5Apply thread sealant.

8See the Throat Packing Detail at left.

9 See the Piston Packing Detail at left.

10Torque to 190–217 NSm (140–160 ft-lb).

8 1

Throat Packing Detail (Displacement Pump 236458 Shown; see page 24 for options.)

8 (Ref)

6

7 4

*4

*18

*19

*3

T8

6 (Ref)

4 *11

Piston Packing Detail

(Displacement Pump 236458 Shown;3 5

see page 24 for options.)

*12

2 (Ref)

9 (Ref)

E

2

9 F

72

10 (Ref)

 

 

 

*3

7 (Ref)

9 P

 

*19

 

*11

6

4

4

 

 

 

*18

 

 

 

*4

4

*30

*11 (Ref)

10 3

S

D

5 10

13*

05468

Fig. 9

308350 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents
Dura-Flot600 Pumps Instructions Parts ListList of Models Table of ContentsEquipment Misuse Hazard SymbolsMoving Parts Hazard Injection HazardToxic Fluid Hazard Fire and Explosion Hazard308350 Object being sprayed follow your local code InstallationSystem Accessories General Information GroundingAir Line Accessories KEY Typical Installation110 Operation/MaintenancePressure Relief Procedure Packing Nut/Wet-CupFlush the Pump Before First Use Starting and Adjusting the PumpFlushing Shutdown and Care of the PumpIts stroke keep the wet-cup 1/3 filled with a Troubleshooting ChartCompatible solvent Required Tools ServiceDisconnecting the Displacement Pump Reconnecting the Displacement Pump 107 106 110 109 101 105 108Disassembly Displacement Pump ServiceTorque to 258-285 NSm 190-210 ft-lb Reassembly 10 Ref 11 Ref Using a pipe wrench, torque the intake housing Install the seal 11* on the bottomHousing 7 onto the cylinder handtight. Sealing surface of the intake housing101 105 108 109 102Y 107 106 110 Parts102Y 107 106 110 113 Part No Pump, Series a 251 Ratio, with Senator Air Motor101 105 108 109 102Y 107 110 106 112Piston Packing Stack See Throat Packing Stack seeUHMWPE/PTFErPacking Kit 237609 Optional Packing KitsTeflonr Packing Kit 237236 Optional UHMWPE/Leather Packing Kit 237238 OptionalTested in accordance with ISO Technical DataLiters/min 11.4 Mounting Hole Layout DimensionsGraco Information Graco Standard Warranty
Top Page Image Contents