Karcher KMR 1550 B manual Burns hazard, Maintenance tasks Tilting the seat forwards/backwards

Page 14

English

Operating instructions for users

KMR 1550 B

Caution! Make sure engine cannot be started unintentionally.

In order to prevent the engine from being started unintentionally, proceed as follows after you have parked the sweeper.

nPull out the ignition key.

nDisconnect the battery at the negative terminal.

The necessary maintenance tasks or daily inspections can be carried out with the bonnet raised or the seat tipped forward.

Injury hazard!

Do not open the bonnet until the motor has been switched off.

Burns hazard!

Take care not to touch the exhaust when you open the bonnet.

Injury hazard!

If you need to work under the waste container while it is in the raised positi- on, you must first of all secure the container to prevent it from dropping down unintentionally:

n Secure the waste container at both sides.

– Undo the hand screw in the side cover.

– Insert the hand screw into the locking bolt and pull it out.

n Release the bolt before using the sweeper again.

–Push the bolt inwards as far as it will go.

–Undo the hand screw and replace it in the side cover.

Maintenance tasks Tilting the seat forwards/backwards

nPull the lever and slide the seat forwards.

n Undo the catch with the square spanner (with ignition key). n Tip the seat forwards until it locks in position.

nTo close the compartment, release the mechanism holding the seat in the

raised position and fold the seat down.

34

Page 13 Page 15
Image 14
Page 13 Page 15
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Contents Operating instructions for usersExplosion hazard while refuelling For your safetyEnclosed leaflet Safety Information No Fire hazard while sweeper is operatingMain components After moving the sweeper without the engine running Prior to initial start-upMoving the sweeper Dashboard Operating the sweeperOperating controls Preparing the sweeper for use Adjusting the driver’s seatAdjusting r.p.m. of side brush Filling the fuel tank Explosion hazard while refuellingDriving the sweeper for the first time Setting offStarting the sweeper BrakingManual cleaning Cleaning the filter Emptying the waste containerAutomatic cleaning Some important points in advance Injury hazardSweeping a damp or wet floor surface Typical applicationsSweeping Dry Floors Sweeper Long-term storageTransporting Picking up large items sticks, cans, etcCleaning and care MaintenanceMaintenance tasks Tilting the seat forwards/backwards Burns hazardTool compartment and sweeper tool kit Disconnecting the batteryOpening/closing the bonnet Checking tyre pressureTopping up with engine oil Replacing the fuel filter Cleaning the air filterReplacing the engine oil filter Checking the hydraulic fluid level Charging the battery Safety informationChecking the electrolyte in the battery Replacing the brush roller Replacing sealing stripsReplacing the side brush Burns hazard Take care not to touch the hot exhaustReplacing fuses Replacing the dust filterSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents