Karcher KMR 1550 B manual Replacing the engine oil filter, Cleaning the air filter

Page 17

KMR 1550 B

Operating instructions for users

English

 

Replacing the engine oil filter

 

 

n Drain off the engine oil.

 

 

n Open the service flap

 

 

– Unscrew knob and lift off service flap.

 

 

n Unscrew the engine oil filter.

 

 

n Rub engine oil into the seal on the new oil filter.

 

 

n Attach the new engine oil filter by hand and screw it down until the seal

 

just touches the casing.

 

 

n Tighten the engine oil filter by giving it another half turn.

 

 

n Pour in new engine oil and check the level.

 

 

n Start the engine and check that there are no leaks.

 

Cleaning the air filter

nRemove the cover on the air filter.

nTake out the filter cartridge.

nSeparate the paper and plastic inserts.

nRenew the paper insert (this insert cannot be cleaned).

nClean the plastic insert

–Wash the plastic insert in soapy water (e.g. water with a little washing up liquid added) and rinse it thoroughly in clean water.

–Allow the insert to dry and then spray it lightly with engine oil.

–Squeeze out any excess oil.

nRefit all parts of the filter and secure the cover in place.

Replacing the fuel filter

nClose the fuel tap.

nUndo both hose clamps on the fuel filter.

nPull hoses off the filter.

nFit new filter by reversing procedure above.

37

Page 16 Page 18
Image 17
Page 16 Page 18
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Operating instructions for users ContentsEnclosed leaflet Safety Information No For your safetyExplosion hazard while refuelling Fire hazard while sweeper is operatingMain components After moving the sweeper without the engine running Prior to initial start-upMoving the sweeper Dashboard Operating the sweeperOperating controls Adjusting r.p.m. of side brush Adjusting the driver’s seatPreparing the sweeper for use Filling the fuel tank Explosion hazard while refuellingStarting the sweeper Setting offDriving the sweeper for the first time BrakingAutomatic cleaning Cleaning the filter Emptying the waste containerManual cleaning Some important points in advance Injury hazardSweeping a damp or wet floor surface Typical applicationsSweeping Dry Floors Transporting Long-term storageSweeper Picking up large items sticks, cans, etcMaintenance Cleaning and careBurns hazard Maintenance tasks Tilting the seat forwards/backwardsOpening/closing the bonnet Disconnecting the batteryTool compartment and sweeper tool kit Checking tyre pressureTopping up with engine oil Replacing the fuel filter Cleaning the air filterReplacing the engine oil filter Checking the hydraulic fluid level Charging the battery Safety informationChecking the electrolyte in the battery Replacing the side brush Replacing sealing stripsReplacing the brush roller Burns hazard Take care not to touch the hot exhaustReplacing the dust filter Replacing fusesSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents