Karcher KMR 1550 B Starting the sweeper, Driving the sweeper for the first time, Setting off

Page 9

KMR 1550 B

Operating instructions for users

English

Starting the sweeper

Driving the sweeper for the first time

Select a location with plenty of space to drive the sweeper initially, until you become familiar with the individual operating controls and their functions. All directions given (left/right, front/rear) are as seen from the driver’s seat.

nSit down on the driver’s seat.

The engine cannot be started unless the driver is sitting on the seat (seat contact switch).

As soon as the driver gets up from the seat, the engine cuts out (safety shutdown).

nRaise the brush roller 1.

–Press button

nRaise the side brush 2.

–Press button

nApply the parking brake 3.

nIf engine is cold

–pull cold-start lever 7 (choke).

nSet throttle lever 5 to approx. 1/3 max. speed.

nStart engine

–turn ignition key 4 clockwise until engine starts.

nWhen engine is running smoothly, push cold-start lever 7 back in.

Setting off

Note:

If the sweeper has not been used for longer than 2 months, run the engine for a few minutes with the unit in neutral before commencing work.

nSet the throttle lever 5 to operating speed (maximum revs., lever pushed towards the rear.)

nRelease the parking brake 3.

–Press the release button and push the lever downwards.

nDepress drive pedal slowly

–6a Machine drives forward

–6b Machine reverses

The speed at which the sweeper travels forwards or backwards is infinitely variable and is controlled by applying pressure to the drive pedal.

Avoid pressing the drive pedal with a jerky movement, otherwise the hydraulic system could be damaged as a result.

Negotiate slopes with engine at full speed but sweeper travelling slowly (drive pedal pressed only ½ way down).

Braking

nLift your foot off the drive pedal 6a/6b and the sweeper brakes automatical- ly.

Avoid braking the sweeper abruptly by pressing the pedal against the direction of travel, as this could cause damage to the hydraulic system.

Bringing the sweeper to a halt and stopping the engine

nLift your foot off the drive pedal 6a/6b. The sweeper brakes automatically and comes to a halt.

nSet the throttle lever 5 to minimum revs. (push lever forwards).

nApply the parking brake 3.

nIt is very important that you raise the brush roller and side brush so that the bristles do not become damaged.

nStop the engine.

–Turn the ignition key 4 anticlockwise to position 0 and pull it out. After the engine has been switched off, the filter is automatically clea- ned for approx. 10 seconds.

29

Page 8 Page 10
Image 9
Page 8 Page 10
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Operating instructions for users ContentsEnclosed leaflet Safety Information No For your safetyExplosion hazard while refuelling Fire hazard while sweeper is operatingMain components Prior to initial start-up Moving the sweeperAfter moving the sweeper without the engine running Operating the sweeper Operating controlsDashboard Adjusting r.p.m. of side brush Adjusting the driver’s seatPreparing the sweeper for use Filling the fuel tank Explosion hazard while refuellingStarting the sweeper Setting offDriving the sweeper for the first time BrakingAutomatic cleaning Cleaning the filter Emptying the waste containerManual cleaning Some important points in advance Injury hazardTypical applications Sweeping Dry FloorsSweeping a damp or wet floor surface Transporting Long-term storageSweeper Picking up large items sticks, cans, etcMaintenance Cleaning and careBurns hazard Maintenance tasks Tilting the seat forwards/backwardsOpening/closing the bonnet Disconnecting the batteryTool compartment and sweeper tool kit Checking tyre pressureTopping up with engine oil Cleaning the air filter Replacing the engine oil filterReplacing the fuel filter Checking the hydraulic fluid level Safety information Checking the electrolyte in the batteryCharging the battery Replacing the side brush Replacing sealing stripsReplacing the brush roller Burns hazard Take care not to touch the hot exhaustReplacing the dust filter Replacing fusesSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents