Karcher KMR 1550 B Disconnecting the battery, Opening/closing the bonnet, Checking tyre pressure

Page 15

KMR 1550 B

Operating instructions for users

English

 

Disconnecting the battery

 

 

n Slide the seat forwards and tilt it towards the front.

 

 

n Use an open-jawed spanner (size 10 mm) to first of all loosen the clamp

 

on the negative terminal ( – ) and then pull it off. Repeat the procedure for

 

the positive terminal ( + ).

 

 

n Reconnect the battery by first of all attaching the clamp on the positive

 

terminal ( + ) and then the clamp on the negative terminal ( – ).

 

Opening/closing the bonnet

nPull the section of panelling upwards and unscrew the knob on the inside of the bonnet.

nRaise the bonnet towards the front until it automatically locks in position.

nLift the rod up slightly and close the bonnet.

nScrew the knurled knob back into the inside of the bonnet.

Tool compartment and sweeper tool kit

nThere is a tool compartment under the bonnet. This compartment contains the tools required to carry out routine maintenance tasks.

Checking tyre pressure

nPark the sweeper on a level surface.

nCheck the tyre pressure and make any necessary corrections. Air pressure for front and rear wheels = 8 bar.

35

Page 14 Page 16
Image 15
Page 14 Page 16
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Operating instructions for users ContentsFire hazard while sweeper is operating For your safetyEnclosed leaflet Safety Information No Explosion hazard while refuellingMain components Prior to initial start-up Moving the sweeperAfter moving the sweeper without the engine running Operating the sweeper Operating controlsDashboard Filling the fuel tank Explosion hazard while refuelling Adjusting the driver’s seatAdjusting r.p.m. of side brush Preparing the sweeper for useBraking Setting offStarting the sweeper Driving the sweeper for the first timeSome important points in advance Injury hazard Cleaning the filter Emptying the waste containerAutomatic cleaning Manual cleaningTypical applications Sweeping Dry FloorsSweeping a damp or wet floor surface Picking up large items sticks, cans, etc Long-term storageTransporting SweeperMaintenance Cleaning and careBurns hazard Maintenance tasks Tilting the seat forwards/backwardsChecking tyre pressure Disconnecting the batteryOpening/closing the bonnet Tool compartment and sweeper tool kitTopping up with engine oil Cleaning the air filter Replacing the engine oil filterReplacing the fuel filter Checking the hydraulic fluid level Safety information Checking the electrolyte in the batteryCharging the battery Burns hazard Take care not to touch the hot exhaust Replacing sealing stripsReplacing the side brush Replacing the brush rollerReplacing the dust filter Replacing fusesSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents