Karcher KMR 1550 B manual Replacing fuses, Replacing the dust filter

Page 21

KMR 1550 B

Operating instructions for users

English

 

n Remove the next three hand screws and lift off the roller cover.

 

 

n Pull out the brush roller at the side.

 

Brush roller viewed

from above

Direction of travel

Note: Raise the brush roller unit before inserting a new roller.

nInsert a new brush roller, paying attention to correct alignment (see illu- stration). The projections on the driver must slot into the recesses in the brush roller.

nContinue with assembly in reverse order of removal.

Replacing fuses

nStop the sweeper and switch off the engine.

nOpen the bonnet.

nRemove the cover.

nReplace any blown fuse with one with the same rating. There are spare fuses in the fuse box.

Note:

If the same fuse blows several times, this is a sign that there is a fault in the electric circuitry. Locate and repair the fault (see section on Troubleshooting).

Replacing the dust filter

Dust filters should be inspected for signs of damage every 50 operating hours. A damaged filter allows dust to be blown into the engine compartment and surrounding area. A significant build-up of dust at the air exit from the fan is an indication that the filter is not properly seated or is defective.

nRaise the waste container to its max. height.

nSecure the waste container at both sides.

–Undo the screw in the side cover.

–Insert the hand screw into the locking bolt and pull it out.

nRemove the two hand screws in the preliminary filter and lift out the filter from below.

nLoosen 2 screws on the thrust bearing and turn the thrust bearing anti- clockwise up to the stop (1). Draw out the thrust bearing towards the rear

(2).

nDraw the filter element towards the rear and take it out to the rear (3).

41

Page 20 Page 22
Image 21
Page 20 Page 22
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Operating instructions for users ContentsEnclosed leaflet Safety Information No For your safetyExplosion hazard while refuelling Fire hazard while sweeper is operatingMain components Prior to initial start-up Moving the sweeperAfter moving the sweeper without the engine running Operating the sweeper Operating controlsDashboard Adjusting r.p.m. of side brush Adjusting the driver’s seatPreparing the sweeper for use Filling the fuel tank Explosion hazard while refuellingStarting the sweeper Setting offDriving the sweeper for the first time BrakingAutomatic cleaning Cleaning the filter Emptying the waste containerManual cleaning Some important points in advance Injury hazardTypical applications Sweeping Dry FloorsSweeping a damp or wet floor surface Transporting Long-term storageSweeper Picking up large items sticks, cans, etcMaintenance Cleaning and careBurns hazard Maintenance tasks Tilting the seat forwards/backwardsOpening/closing the bonnet Disconnecting the batteryTool compartment and sweeper tool kit Checking tyre pressureTopping up with engine oil Cleaning the air filter Replacing the engine oil filterReplacing the fuel filter Checking the hydraulic fluid level Safety information Checking the electrolyte in the batteryCharging the battery Replacing the side brush Replacing sealing stripsReplacing the brush roller Burns hazard Take care not to touch the hot exhaustReplacing the dust filter Replacing fusesSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents