Karcher KMR 1550 B manual Prior to initial start-up, Moving the sweeper

Page 6

English

Operating instructions for users

KMR 1550 B

Prior to initial start-up

Unloading procedure

Do not use a forklift truck for unloading as it could cause da- mage to the sweeper.

The sweeper has been lashed onto a pallet to ensure that it can be transpor- ted safely. The procedure for unpacking the sweeper is as follows:

1.Remove the wooden boards from the pallet and nail them onto the end of the pallet (in front of the sweeper).

2.Detach the wires holding the sweeper in place at the ends of the pallet.

3.Knock away the blocks used for locking the wheels and use them for the support of the wooden planks on the left and right.

4.Drive the sweeper off the pallet and down the ramp made from the boards.

5.The side brush has been tied to the chassis for transport. Undo the cord holding it in place.

Moving the sweeper

If you want to move the sweeper without starting the engine,

nPull the section of panelling upwards and unscrew the knob on the inside of the bonnet.

nRaise the bonnet towards the front until it automatically locks in position.

nTake the open-jawed spanner (7 mm A/F) out of the tool kit.

nTurn the free-wheel arm (bypass) on the hydraulic pump either to the right or left by 90°, using the open-jawed spanner (7 mm A/F).

Note:

Do not move the sweeper over long distances or at a speed faster than

10 km/h with the switched off (e.g. when it is being towed), as this will result in damage to the hydraulic system.

After moving the sweeper without the engine running

n Turn the free-wheel arm back through 90°, otherwise it will not be possible

to drive the sweeper normally.

n Lift the rod up slightly and close the bonnet.

n Tighten the knob on the inside of the bonnet.

26

Page 5 Page 7
Image 6
Page 5 Page 7
Contents KMR 1550 B Deutsch English Français Italiano Nederlands Español Contents Operating instructions for usersExplosion hazard while refuelling For your safetyEnclosed leaflet Safety Information No Fire hazard while sweeper is operatingMain components Prior to initial start-up Moving the sweeperAfter moving the sweeper without the engine running Operating the sweeper Operating controlsDashboard Preparing the sweeper for use Adjusting the driver’s seatAdjusting r.p.m. of side brush Filling the fuel tank Explosion hazard while refuellingDriving the sweeper for the first time Setting offStarting the sweeper BrakingManual cleaning Cleaning the filter Emptying the waste containerAutomatic cleaning Some important points in advance Injury hazardTypical applications Sweeping Dry FloorsSweeping a damp or wet floor surface Sweeper Long-term storageTransporting Picking up large items sticks, cans, etcCleaning and care MaintenanceMaintenance tasks Tilting the seat forwards/backwards Burns hazardTool compartment and sweeper tool kit Disconnecting the batteryOpening/closing the bonnet Checking tyre pressureTopping up with engine oil Cleaning the air filter Replacing the engine oil filterReplacing the fuel filter Checking the hydraulic fluid level Safety information Checking the electrolyte in the batteryCharging the battery Replacing the brush roller Replacing sealing stripsReplacing the side brush Burns hazard Take care not to touch the hot exhaustReplacing fuses Replacing the dust filterSetting the Sweeping Pattern Troubleshooting Technical specifications KMR 1550 B KMR 1550 B KONFORMITÄTSERKLÄRUNG-EG Quiposy Xxx-948.1

KMR 1550 B specifications

The Kärcher KMR 1550 B is an innovative and powerful ride-on sweeper designed for efficient cleaning in various environments, including indoor and outdoor surfaces. This machine combines advanced technology with user-friendly features, making it an ideal solution for both commercial and industrial applications.

One of the standout features of the KMR 1550 B is its robust and efficient cleaning system. The sweeper is equipped with dual side brushes that ensure thorough cleaning along edges and walls, while the main roller brush efficiently picks up larger debris. The combination of these brushes allows for effective sweeping of a wide range of materials, including dust, dirt, and leaves, ensuring a pristine environment.

The KMR 1550 B operates using a powerful, battery-powered electric drive, making it an eco-friendly choice for users conscious of their environmental impact. The machine provides quiet operation, allowing for use in noise-sensitive areas without disruption. With its impressive battery life, the sweeper can run for hours on a single charge, maximizing productivity and minimizing downtime.

Another key characteristic of the KMR 1550 B is its ergonomic design. The spacious driver's seat is adjustable, ensuring comfort for operators of varying heights. The intuitive control system allows users to easily maneuver the machine, while the compact size ensures it can navigate tight spaces with ease. Safety features, such as automatic braking and visibility-enhancing lights, further enhance the user experience.

Additionally, the KMR 1550 B boasts a large debris hopper, which reduces the frequency of emptying and allows for longer cleaning intervals. This feature is especially beneficial in large areas where continuous operation is necessary. The hopper can be easily emptied from the driver's seat, streamlining the cleaning process.

Maintenance is straightforward with the KMR 1550 B, as Kärcher designed it with accessibility in mind. Regular maintenance points are easy to reach, ensuring that the machine remains in optimal condition for maximum performance over time.

In summary, the Kärcher KMR 1550 B is a versatile and efficient ride-on sweeper that combines advanced technologies with practical features. Its powerful cleaning capabilities, eco-friendly operation, ergonomic design, and ease of maintenance make it an excellent choice for anyone seeking a reliable solution for their cleaning needs.
Top Page Image Contents